User manual GAGGIA CONCETTO

[. . . ] Declare under our responsibility that the product : AUTOMATIC PROFESSIONAL COFFEE MACHINE TIPO: CAP002 / CAP002A / CAP002B to which this declaration relates is in conformity with the following standards or other normative documents : Safety of household and electrical appliances - General requirements EN 60335-1 - 1994 + A11 / A12 / A13 Safety of household and electrical appliances - Part 2^ Particular requirements for appliances for heating liquids EN 60335-2-15 - Edit. 2^ Particular requirements for coffee mills and coffee grinders EN 60335-2-33 - April 1990 Limits and methods of measurements of radio disturbance characteristics of electrical motor-operated and thermal appliances for households and similar purposes, electric tools and similar electric apparatus - EN 55014 - Edit. This manual is an integral part of this machine and it must be kept in a handy place, in good conditions, for as long as the machine will be operating (including any transfer of ownership). It aims at giving the necessary information about a correct and safe use of this machine. [. . . ] GROUND DOSE The quantity of ground coffee, programmed during the installation, can be adjusted at every brewing. TEMPERATURES The brewing temperature of water, programmed during the installation, can be adjusted at every brewing. NOTE - The temperature "first coffee" is selected at the first brewing, when the machine is switched on. PREBREWING This function allows a short dwell time during the first brewing phase. This can improve the quality of the coffee which, during the dwell, has the time to "infuse" into the first part of water received. - "OFF", the button cannot be programmed, therefore the quantity of hot water has to be manually adjusted. NOTE - If the function is disabled the programmed figures remain unchanged and ready to be used when the function is re-activated. PROGRAMMED CLEANING This function enables the brewing of a small hot water quantity (abt 5 cc), in order to avoid any deposits in the brew group. This cleaning starts automatically after the programmed time (20÷ 240 minutes), from the last coffee brewing. By selecting: "ON", the adjustment cursor blinks under the last right figure, and the value can be increased or decreased by 10 min; every adjustment must always be confirmed. NOTE - During the cleaning, the message " P R O G R A M M E D C L E A N I N G " will be displayed; cleaning can also be activated manually by holding the button for 3 seconds. BREW GROUP CLEANING This function enables the cleaning of the brew group (28) using the provided tablets (for any information about tablets ask to an Authorized Customer Service Center). - Press - Remove the brew group; on display: "INSERT THE GROUP"; - Put the tablet inside the brew group and refit the group; on display: "CLOSE DOOR". - Refit the brew group; on display: "CLOSE DOOR" - Close the door; on display: "CLEANING COMPLETED. PRESS STAR BUTTON" ; Press to exit the menu definitely and make the machine ready to be used. MILK PROGRAMMING The milk quantity programming can be enabled by selecting: - "ON", the button (Pr. - By selecting "CLOCK", the cursor blinks on the hours, that can thus be adjusted. - After confirming the hour setting, the cursor moves on the next figure to be adjusted (the minutes, then the day, the month and finally the year). HOT WATER MIXING While the different types of beverages are brewed, the machine adds a certain amount of hot water, according to the programming. TIMES ON/OFF This function enables to program the automatic switching-on and off times over a whole week. - By selecting "TIMES ON/OFF" , the cursor blinks on the day to be modified. - Enter the day, using the button (down), turning the small letter into a capital one. [. . . ] Never clean the cappuccinatore when the machine is on "standby". Every time the CAPPUCCINATORE is used, it must be cleaned in order to avoid the solidification of residues. 15) To clean each part of the cappuccinatore group separately, remove: - upper protection panel (24), pulling it upwards; - cream adjusting pin (23); - air diffuser (31) from the cappuccinatore group, pulling upwards; - cappuccinatore group (29) by pulling; - joint (32) connecting the suction pipe to the cappuccinatore; - adjustable brewing spout (25); - milk suction tube (30). 3 Drip tray and relative grill Remove the drip tray (12) from the machine and wash it with running water, paying particular attention to the grill. [. . . ]