User manual GARMIN G1000 MOONEY QUICK REFERENCE CARD M20M M20R

[. . . ] Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. Tel: 503/391. 3411 Fax 503/364. 2138 Garmin (Europe) Ltd. , Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, Hampshire S051 9DL, U. K. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel: 886/02. 2642. 9199 Fax: 886/02. 2642. 9099 Web Site Address: www. garmin. com Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express written permission of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. [. . . ] With the VOR Information Page displayed, press the FMS Knob to activate the cursor. Turn the large FMS Knob to highlight the desired selection field (identifier, name or closest city). Turn the FMS Knobs to enter an identifier, name or city and press the ENT Key. If desired, press the ENT Key to place the frequency in the NAV receiver standby frequency field. Press the FMS Knob to remove the cursor. Garmin G1000 Cockpit Reference Guide for the DA42 7-5 Figure 7-9 Nearest Airports Page Access Information on a VOR 1) 2) Nearest Airport Information on the MFD Select the Nearest Airports Page 1) 2) Turn the large FMS Knob to select the `NRST' page group. With the Nearest Airports Page displayed, press the APT Softkey to place the cursor in the `NEAREST AIRPORTS' field. The first airport in the nearest airports list is highlighted. 3) 4) Access Information on a Specific Airport 1) 5) SECTION 7 ­ NAVIGATION 2) 3) Press the FMS Knob, then turn the large FMS Knob to highlight the desired airport. With the Nearest Airports Page displayed, press the RNWY Softkey to place the cursor in the `RUNWAYS' field. Press the FMS Knob to remove the flashing cursor. Primary COM Frequency Nearest Airports Information on the PFD Bearing TO Airport Symbol Identifier Distance Access Runway Information for the Selected Airport 1) Runway Length 2) 3) Figure 7-10 Nearest Airports Window Quickly Tune the COM Transceiver to a Nearby Airport Frequency 1) With the Nearest Airports Page displayed, press the FREQ Softkey to place the cursor in the `FREQUENCIES' field. Press the Frequency Transfer Key to place the frequency in the active field. Press the FMS Knob to remove the flashing cursor. Press the NRST Softkey to display the PFD Nearest Airports Window. Press the ENT Key to load the frequency into the COM frequency standby field. Press the FMS Knob to remove the flashing cursor. 2) 3) 4) Garmin G1000 Cockpit Reference Guide for the DA42 7-9 SECTION 7 ­ NAVIGATION View Additional Details for a Listed Airspace 1) 2) 3) 4) 5) With the Nearest Airspace Page displayed, press the FMS Knob to activate the cursor. Turn the large FMS Knob to scroll through the list, highlighting the desired airspace. Press the ALERTS Softkey to place the cursor in the `AIRSPACE ALERTS' field. Press the FMS Knob to remove the flashing cursor. View and Quickly Load the Frequency for a Controlling Agency 1) With the Nearest Airspace Page displayed, press the FREQ Softkey to place the cursor in `FREQUENCIES' field. Press the ENT Key to load the frequency into the COM frequency standby field. Press the FMS Knob to remove the flashing cursor. 2) 3) 4) 7-10 Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 8 ­ FLIGHT PLANNING SECTION 8: FLIGHT PLANNING The following discussions pertain to the Multi Function Display, unless otherwise indicated. 4) 5) 6) 7) Repeat steps 2 and 3 until the desired name is entered. Turn the FMS Knobs to enter the position coordinates or the radial and distance from the reference waypoint. With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor. Turn the large FMS Knob to move the cursor to the desired field and turn the small FMS Knob to make changes. Select the User Waypoint Information Page and press MENU to display the User Waypoint Information Page Options or press the DELETE Softkey. [. . . ] The G1000 system should be serviced when possible. GRS 77 Alert Messages Alerts Window Message AHRS TAS ­ AHRS not receiving airspeed. Comments The AHRS is not receiving true airspeed from the air data computer. The aircraft is outside geographical limits for approved AHRS operation. Heading is flagged as invalid. Garmin G1000 Cockpit Reference Guide for the DA42 12-13 SECTION 12 ­ ANNUNCIATIONS & ALERTS GMU 44 Alert Messages Alerts Window Message HDG FAULT ­ A magnetometer fault has occurred. [. . . ]