User manual GARMIN G1000 TIGERAG-5B PILOTS GUIDE-PART2OF2

[. . . ] Tel: 503/391. 3411 Fax 503/364. 2138 Garmin (Europe) Ltd, Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton, SO40 9RB, U. K. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel: 886/02. 2642. 9199 Fax: 886/02. 2642. 9099 Web Site Address: www. garmin. com Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express written permission of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin® and G1000® are registered trademarks of Garmin Ltd. These trademarks may not be used without the express permission of Garmin. NavData® is a registered trademark of Jeppesen, Inc. ; Stormscope® is a registered trademark of L-3 Communications; and XM® is a registered trademark of XM Satellite Radio, Inc. March, 2008 190-00324-09 Rev. [. . . ] 2) Turn the large FMS Knob to highlight the title for the approach, departure, arrival, or airway to be deleted. With `OK' highlighted, press the ENT Key to remove the selected procedure or airway. Flight Instruments EIS Nav/Com/ XPDR/Audio AFCS 3) 4) GPS Nav STORE A FLIGHT PLAN Flight Planning 1) 2) 3) After creating a flight plan on either the PFD or MFD, it may be saved by pressing the MENU Key. Turn the large FMS Knob to highlight `Store Flight Plan' and press the ENT Key. With `OK' highlighted, press the ENT Key to store the flight plan. Procedures Hazard Avoidance EDIT A STORED FLIGHT PLAN 1) 2) 3) 4) 5) 6) 7) Press the FPL Key on the MFD and turn the small FMS Knob to display the Flight Plan Catalog Page. Press the FMS Knob to return to the Flight Plan Catalog Page. Additional Features Abnormal Operation Annun/ Alerts Appendix DELETE A WAYPOINT FROM THE FLIGHT PLAN 1) Press the FPL Key to display the active flight plan. Press the FMS Knob to activate the cursor. 29 Index 190-00324-09 Rev. A Garmin G1000 Cockpit Reference Guide for the DA40/40F Flight Planning Flight Instruments Or, for a stored flight plan: a) Press the FPL Key on the MFD and turn the small FMS Knob to select the Flight Plan Catalog Page. 2) 3) 4) Turn the large FMS Knob to highlight the waypoint to be deleted. Press the CLR Key to display a `REMOVE (Wpt Name)?' confirmation window. To cancel the delete request, turn the large FMS Knob to highlight `CANCEL' and press the ENT Key. Once all changes have been made, press the FMS Knob to remove the cursor. GPS Nav AFCS Nav/Com/ XPDR/Audio EIS 5) Flight Planning Procedures INVERT AND ACTIVATE A STORED FLIGHT PLAN 1) 2) 3) 4) 5) 6) Press the FPL Key on the MFD. c) Press the ENT Key to designate the altitude for use in giving vertical guidance. Procedures Flight Planning GPS Nav AFCS ACTIVATE AN ARRIVAL LEG 1) 2) 3) 4) 5) Press the FPL Key to display the active flight plan. Turn the large FMS Knob to highlight the desired waypoint within the arrival. With `ACTIVATE' highlighted, press the ENT Key. Abnormal Operation Annun/ Alerts Additional Features Hazard Avoidance LOAD AND/OR ACTIVATE AN APPROACH PROCEDURE NOTE: If certain GPS parameters (WAAS, RAIM, etc. ) are not available, some published approach procedures for the desired airport may not be displayed in the list of available approaches. Appendix 1) Index Press the PROC Key. Turn the large FMS Knob to highlight `SELECT APPROACH'. 2) 34 Garmin G1000 Cockpit Reference Guide for the DA40/40F 190-00324-09 Rev. A list of available approaches for the destination airport is displayed. A list of available transitions for the selected approach procedure is now displayed. The "Vectors" option assumes vectors will be received to the final course segment of the approach and will provide navigation guidance relative to the final approach course. If desired, the DA/MDA for the selected approach procedure may be entered and displayed on the PFD. Turn the small FMS Knob in the direction of the green arrow to change the display from OFF to BARO. Turn the small FMS Knob to enter the published DA/MDA for the selected approach procedure. Flight Instruments EIS Nav/Com/ XPDR/Audio 7) 8) AFCS GPS Nav 9) Flight Planning 10) Press the ENT Key. 11) Turn the large FMS Knob to select either `LOAD?' or `ACTIVATE?'. [. . . ] A parallel course has been selected, causing the vertical deviation to go invalid. The G1000 system should be serviced. Flight Instruments EIS Nav/Com/ XPDR/Audio AFCS GPS Nav VNV ­ Unavailable. Unsupported leg type in flight plan. Flight Planning Procedures VNV ­ Unavailable. NO WGS84 WPT ­ Non WGS 84 waypoint for navigation -[xxxx] TRAFFIC FAIL ­ Traffic device has failed. [. . . ]