User manual GARMIN GMX 200 AFMS

[. . . ] Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. garmin. com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, GPSMAP®, AutoLocate®, TracBack®, Apollo, and MapSource® are registered trademarks of Garmin Ltd. [. . . ] Times are Zulu times when the data was assembled on the ground, not the time the data was received by the FIS sensor. For GMX 200s that have a GPS receiver that provides time, the Zulu time is the time reported by the GPS receiver. For GMX 200s that do not have time provided by a GPS receiver, this field is invalid and dashed out. Product times are shown in white when they are 0 to 5 minutes old, gray when they are 5 to 10 minutes old, and yellow when they are older than 10 minutes. For GMX 200s that have time available from a GPS receiver, age is based on the time reported by the GPS receiver. For GMX 200s that do not have time available from a GPS receiver, age is based on the time the data was received from the FIS sensor. In this case, the age of the data may be older than what is shown by the color coding. The WSI logo on the right is displayed when new data is being transferred from the WSI receiver to the GMX 200. Zulu Time Graphical METARs Weather Radar Echo Tops Warning Boxes Winds Aloft Winds Aloft Altitude Temporary Flight Restrictions PIREPs Lightning WSI FIS Graphic Weather Product Times 190-00607-06 Rev D 1 WSI Addendum WSI - FIS Graphical WX Overlay Options Graphical Weather (WX) Display A variety of graphical information is available with the Overlay function when viewing the Graphical WX display. Some or all of the following may be available, based on your FIS subscription. · US and/or Canadian Weather Radar (determined by subscription) · METARs, US, and/or Canadian (determined by subscription) · SIGMETs & AIRMETs · Echo Tops · Icing · TFRs · Lightning · Winds/Temperature Aloft · Label · Flight Plan · Legend · Map Detail · Map Orientation Weather radar images are available for display from the FIS sensor by selecting the Graphical WX option. A cyan dot pattern indicates areas where no data has been received from the FIS sensor. TFRs are displayed on the MAP function when Airspaces are enabled in the MAP function. Menu Options for Overlay Page 2 1. Press the Ovrl function key to allow selection of the Overlay choices when viewing the Graphical WX option. Press MaIn Menu to return to the Main Menu. Press the Wind/temp key to toggle the display of Winds Aloft on, or Temperature Aloft on, or both off. Winds Aloft and Temperature Aloft may not both be shown at the same time. When Winds or Temperature Aloft are on, Alt+ and Alt- Menu Item keys are available to select the altitude to display the reported information. . 190-00607-06 Rev D WSI Addendum WSI - FIS WSI FIS Winds aloft is selected WSI FIS Coverage Data label Press the LABeL key to toggle labels on and off. Flight Plan Press Menu/ent key and then press the FLIGht PLAn key to toggle the Flight Plan course line on and off. The magenta line is the active leg. WSI FIS Temperature aloft is selected with alt keys shown Coverage Data Press the Menu/ent key and then press the Coverage Data key to toggle the display of the WSI weather radar coverage area on and off. Cyan areas indicate that there is no radar coverage. nOTe: Displaying Coverage Data with Radar data will provide a complete picture of Radar Coverage. 190-00607-06 Rev D WSI Addendum WSI - FIS Menu Options for Overlay Page 3 legend Press Menu/ent key and then press the LeGenD key to display the legends describing the graphic display colors. Press the LeGenD key once to display a legend for the METAR, Weather, and Radar colors. The FIS Category columns are loosely defined as message type, location and time stamp to handle the most common type of FIS up-link data. WSI FIS Graphic Weather Menu Items (Trk up 360) Text Display FIS text messages are available on the text display and include METARs, TAFs, AIRMETs, SIGMETs, AIREPs, PIREPs, and TFRs. Individual text messages are updated every five minutes and composed of four parts: message type, location, time, and message body. 1. Press the Menu/enT key and then press the Text key to activate the Text display. The different message types and data content are fully controlled by the ground broadcast systems. [. . . ] If this lookup is successful, a distance shall be presented adjacent to the location text. If no corresponding location can be determined, no distance is assigned but the message is presented at the end of the list. The default sorting method is "Nearest Present Position" and is reset when the FIS Function is reentered. Status information shows satellite signal reception status, the amount of data received, and the weather products that have been activated. Contact your FIS service provider to activate and deactivate products. 1. [. . . ]