User manual GEMINI CDJ-01

[. . . ] DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. When the product exhibits a distinct change in performance, this indicates a need for service. [. . . ] This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. ⷠGROUNDING OR POLARIZATION: If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. This state of the art professional CD player is backed by a three year warranty, excluding lasers. Prior to use, we suggest that you carefully read all the instructions. POWER SWITCH: After making sure that the VOLTAGE SELECTOR SLIDE (1), found on the rear panel, is properly set, plug the unit in and press the POWER (5) switch. Looping with re-loop Frame accurate search Blue LCD display Single auto cue / continuous play Translucent window Top loading instant start play Soft action opening Time select Pitch bend Digital output 4%, 8% & 16% variable pitch with OFF feature PLAY/PAUSE : Each press of the PLAY/PAUSE (8) button causes the operation to change from play to pause or from pause back to play. Do not use this CD player at temperatures below 41°F/5°C or higher than 95°F/35°C. The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be placed on the apparatus. When disconnecting the power cord from an AC outlet, always grasp it by the plug. To prevent electric shock, do not remove the cover or the bottom screws. CUE: With the unit in the play mode, and after memorizing the cue point, pressing the CUE (10) button will cause the CD player to enter the pause mode at the memorized cue point. Holding down the cue button changes the cue function to preview (allowing you to hear the music play from the cue point) and releasing the cue button returns you to the preset cue point. If a cue point is not memorized, pressing the CUE (10) button will cause the unit to return to the beginning of that track. DISPLAY: The DISPLAY (11) shows the track number, play mode, pause mode, and 3 different time displays. These time displays are time elapsed on the track, time remaining on the disc and time remaining on the track. [. . . ] Connect any type of device that will accept a DIGITAL signal, such as DAT, MD, HARD DRIVE, ETC to the COAXIAL (3) INPUTS on the rear panel of the transport to record a DIGITAL signal. PITCH BEND BUTTONS: Pushing the PITCH BEND BUTTONS (21) will automatically raise the pitch up to +4% or lower the pitch down to -4% from the existing pitch setting. releasing the buttons will return the pitch to the original pitch setting. You can use this function to match the pitch bend when mixing from one song to another. [. . . ]