User manual GEMINI GT-1002

[. . . ] Congratulations on your purchase of a GT-SERIES speaker, engineered & manufactured by Gemini Sound Products. Only 1 additional speaker can be added to each speaker in a CHAINLINK setup. [. . . ] All operating instructions should be read before using this equipment. In the USA: If you experience problems with this unit, please call 1 (732) 738-9003 for Gemini Customer Service. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. When moving this equipment, it should be placed in its original carton and packaging. Make sure your equipment is completely OFF and also lower ALL VOLUME, LEVEL, & GAIN controls and before connecting the speaker. Use a 1/4" SPEAKER CABLE (1) from your AMPLIFIER LINE OUTPUT (2) to connect to your speakers 1/4" AMPLIFIER INPUT JACK (3). Another way to connect your AMPLIFIER to your speaker is the TERMINAL CUP (4). Use the PUSH-BUTTON CONNECTORS (5) to connect the POSITIVE (-) and NEGATIVE (-) ends of a standard SPEAKER WIRE (6) with a 12-GAUGE minimum thickness from your AMPLIFIER LINE OUTPUT (2) to your speakers TERMINAL CUP (4). You can also use the extra 1/4" AUXILIARY OUTPUT JACK (7) to CHAINLINK an additional speaker using an additional 1/4" SPEAKER CABLE (8). The speakers can be used in pairs for a NORMAL setup, or in groups of four when CHAIN-LINKED together. [. . . ] Shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Gemini Sound Products Corp. [. . . ]