User manual GEMINI PMX-01

[. . . ] OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: · If the product does not operate normally by following the operating instructions. [. . . ] This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power sup ply to your home, consult your product dealer or local power company. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. gROUNDING OR POLARIZATION: · If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceil ing. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to This state of the art mixer is backed by a three year warranty, excluding crossfader and channel slides. POWER ON: When you have completed making all of your connections, plug in the 15V AC(1) adapter to your PMX-01 mixer. The power will turn on and the VU METER (10) power LEDs will glow brightly. The left side of your CROSSFADER(12) is CHANNEL 1(16) while the right side of your CROSSFADER(12) is CHANNEL 2(17). The CROSSFADER (12) in your unit is removable and if the need arises can be easily replaced. Just purchase one from your Gemini dealer and follow the instructions: 5" 2 Stereo Channel Mixer 2 Convertible Phono/Line RCA Inputs 2 Band Rotary Line EQ Control with +/-12 dB Cut Feature Easy Removable Face Plate for User Replaceable Cross Fader Rotary Gain Channel Control Display with Bright LED Face Plate Located Cue Section Fader Allowing Cue Mix Front Panel Located Rotary Cue Volume Control Front Located Headphone Output Unscrew the outside FACE plate screws and remove FACE plate from mixer. All operating instructions should be read before using this equipment. [. . . ] Plug the RCA's from your playable medium into each input to be connected to their respective CHANNELS. When using (a) turntable(s), you will need to ground the RCA cable(s) by screwing in the grounding fork(s) to the GROUNDING SCREW(7) located in the back panel of the PMX-01 mixer. The STEREO LINE INPUTS only accept line level inputs such as a CD, DAT, MiniDisc, etc. Headphones may be plugged into the front panel 1/4" HEADPHONE JACK (9). [. . . ]