User manual GIANT BICYCLES TRANCE SERVICE MANUAL
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIANT BICYCLES TRANCE. We hope that this GIANT BICYCLES TRANCE user guide will be useful to you.
 |
GIANT BICYCLES TRANCE SERVICE MANUAL: Download the complete user guide (610 Ko) |
Manual abstract: user guide GIANT BICYCLES TRANCESERVICE MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] 2005 Trance SERIES DUAL-SUSPENSION BIKE TECHNIC MANUAL
1
CONTENTS
PRODUCT FEATURE SECTION 1. EXPLOADE DRAWING
2
Trance Product feature
This bike falls between XC race-inspired NRS and XC super long travel VT . [. . . ] Shock spec: eye to eye : 165. 1mm(6. 5") shock travel: 38. 1mm(1. 5") hard ware: 22. 2x6mm/40x6mm
Setup for Trance 1 ( See Drawing #1 )
1. Adjusting Air Pressure
The air pressure needed is determined by the rider's weight and riding conditions. The shock should be set to sag 9mm or 1/4 of its stroke while the rider is seated on the bike in riding gear. See table 1 for recommend air pressure: TABLE 1AIR PRESSURE CHART Rider Weight lbs kg 90-100 41-45 100-110 45-50 110-120 50-54 120-130 54-60 130-140 60-64 140-150 64-68 150-160 68-73 160-170 73-77 170-180 77-82 180-190 82-86 190-200 86-91 200-210 91-95 210-220 95-100 220-230 100-104 230-240 104-109 240-250 109-113 250-265 113-120 265-280 120-127 280-295 127-134 Air pressure PSI 82-90 90-100 100-108 108-120 120-128 128-136 136-146 146-154 154-164 164-172 172-182 182-190 190-200 200-208 208-218 218-226 226-241 241-255 255-269
5
2. Rebound Adjustment Rebound damping controls the rate at which the shock returns after it has been com-pressed. The red adjuster dial can be turned clockwise for slower rebound and counter-clockwise for faster rebound. The proper rebound setting is a personal preference and varies depending on rider weight, riding style and riding conditions. ProPedal RP3 Damping Adjustment ProPedal damping reduces pedal induced suspension bob. The three settings of the lever are full ProPedal, light ProPedal and Plush. Use the different settings to tune the shock to different riding conditions and situations. For example, use the full ProPedal position for riding to the top of the mountain and then switch to the Plush position for the descent. Switch between positions and select the one that reduces suspension movement most effectively while providing the desired amount of bump absorption.
Adjusting Air Pressure
Rebound Adjustment ProPedal RP3 Damping Adjustment
Drawing #1
6
Setup for Trance 2 ~ Trance 4 ( See Drawing #2 )
1. [. . . ] Main pivot Seatstay pivot Main linkage pivot Upper shock mount Lower shock mount Chainstay pivot 120 -150 Kgf/cm. Explode Drawing
THE DRAWING BELOW SHOWS RELATIONS OF EVERY PARTS AND FRAME
9 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GIANT BICYCLES TRANCE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIANT BICYCLES TRANCE will begin.