Detailed instructions for use are in the User's Guide.
[. . . ] 8I845GVM-RZ / 8I845GVM-RZ-C
Intel® Pentium® 4 Processor Motherboard
User's Manual
Rev. 1001 12ME-845GVMRZ-1001
Copyright
© 2003 GIGABYTE TECHNOLOGY CO. , LTD Copyright by GIGA-BYTE TECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] Dispose of used batteries according to the manufacturer's instructions. Plug the power cord and turn ON the computer.
- 19 -
Hardware Installation Process
English
8I845GVM-RZ Series Motherboard
- 20 -
Chapter 2 BIOS Setup
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
English
ENTERING SETUP
Powering ON the computer and pressing <Del> immediately will allow you to enter Setup. If you require more advanced BIOS settings, please go to "Advanced BIOS" setting menu. To enter Advanced BIOS setting menu, press "Ctrl+F1" key on the BIOS screen.
CONTROL KEYS
< >< >< <Enter> <Esc> <+/PgUp> <-/PgDn> <F1> <F2> <F5> <F6> <F7> <F8> <F9> <F10> >< > Move to select item Select Item Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu Increase the numeric value or make changes Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Item Help Restore the previous CMOS value from CMOS, only for Option Page Setup Menu Load the file-safe default CMOS value from BIOS default table Load the Optimized Defaults Q-Flash utility System Information Save all the CMOS changes, only for Main Menu
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.
The Main Menu (For example: BIOS Ver. : E4)
Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. The Main Menu allows you to select from eight setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving : Select Item F10: Save & Exit Setup Time, Date, Hard Disk Type. . .
- 21 -
BIOS Setup
English
If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. · Standard CMOS Features
This setup page includes all the items in standard compatible BIOS.
· Advanced BIOS Features
This setup page includes all the items of Award special enhanced features.
· Integrated Peripherals
This setup page includes all onboard peripherals.
· Power Management Setup
This setup page includes all the items of Green function features.
· PnP/PCI Configuration
This setup page includes all the configurations of PCI & PnP ISA resources.
· PC Health Status
This setup page is the System auto detect Temperature, voltage, fan, speed.
· Frequency/Voltage Control
This setup page is control CPU clock and frequency ratio.
· Top Performance
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
· Load Fail-Safe Defaults
Fail-Safe Defaults indicates the value of the system parameters which the system would be in safe configuration.
· Load Optimized Defaults
Optimized Defaults indicates the value of the system parameters which the system would be in best performance configuration.
· Set Supervisor Password
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
· Set User Password
Change, set, or disable password. It allows you to limit access to the system.
· Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
· Exit Without Saving
Abandon all CMOS value changes and exit setup.
8I845GVM-RZ Series Motherboard
- 22 -
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE IDE IDE IDE Primary Master Primary Slave Secondary Master Secondary Slave Fri, Jan 9 2004 22:31:24 [None] [None] [None] [None] [1. 44M, 3. 5"] [None] [Disabled] [All, But Keyboard] 640K 127M 128M +/-/PU/PD: Value F10: Save F6: Fail-Save Default Item Help Menu Level Change the day, month, year <Week> Sun. <Day> 1 to 31 (or maximum allowed in the month) <Year> 1999 to 2098 ESC: Exit F1: General Help F7: Optimized Defaults
English
Drive A Drive B Floppy 3 Mode Suport Holt On Base Memory Extended Memory Total Memory : Move Enter: Select F5: Previous Values
Date
The date format Week Month Day Year is <week>, <month>, <day>, <year>. The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1999 through 2098
Time
The times format in <hour> <minute> <second>. is 13:00:00.
IDE Primary Master, Slave / IDE Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. [. . . ] After restarting your system the "Xpress Install" will continue to install other drivers.
We recommend that you install all components in the list.
- 37 -
Driver Installation
English
Driver install finished !You have to reboot system !
Item Description
Intel Chipset Software Installation Utility Tell the operating system how the chipset components will be configured. Intel Application Accelerator Designed to improve performance of the storage sub-system and overall system performance. USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP. [. . . ]