User manual GORENJE K7703W

[. . . ] Electronic timer GB If button 3 is kept pressed, the left side of the display changes minutes, up to the value of 99 50 (meaning 99 minutes and 50 seconds). If the button is not released, the display digits will change to read 1 40, which means that the reading format was changed to 1 hour and 40 minutes. the left side of the display indicates minutes and the right one seconds. Likewise, if the selected period is longer, the left side displays hours and the right one minutes. [. . . ] After the completion of baking switch the oven off. Electronic timer Wait for 7 seconds for the display to stop flashing and starts indicating the correct current time of day. Setting the period of operation 1 current time / conventional (manual) operation button 2 minus (-) and plus (+) button Turn button 2 in the direction "+" or "-" and release it to lock back in the neutral position. The display indicates 0 00 and the symbol S1 is on, if it has not been switched on earlier. Turn button 2 once again in the direction "+" and keep it in that position. The display indicates 0 10, and the symbol S2 appears, indicating the period of operation of the oven. By keeping button 2 in this position select the desired period of operation in steps of 10 seconds. The left side of the display changes in 10 second intervals until it reaches the value 99 50 (indicating 99 minutes and 50 seconds). If button 2 is not released, the display digits will change to read 1 40, which means that the reading format was changed to 1 hour and 40 minutes. In short: when setting the period, shorter than 1h 40 min the left side of the display indicates minutes and the right one seconds. Likewise, if the selected period is longer, the left side displays hours and the right one minutes. Once the desired period of operation is selected, the time countdown starts after the 7 second lapse. In case the selected period is shorter or equal to 99 minutes and 50 seconds, the countdown intervals will be of 1 second, and if the selected period exceeds 99 minutes and 50 seconds the time will be counted down in 1 minute steps. In case the period needs to be reset to zero during the countdown, keep the button 2 turned towards the position "-" for as long as the display reaches 0 00 and the symbols S1 and S2 are turned off. By turning button 2 again towards the position "-" and releasing it, the clock is reset to the conventional (manual) operation mode. Setting the current time After connecting the appliance to the mains the display indicates flashing 0 00. The current time is set by turning button 1 to the left or right and releasing it (the symbol S1 is on, indicating that the clock has been set to manual (conventional) mode), and by turning button 2 either in the direction "+" or "-". Current time may be corrected anytime (except when the symbol S2 is active) by turning button 1 to the left or right and releasing it, and selecting the new time by turning button 2 to the direction "+" or "-". After setting the time allow a 7 second lapse for the clock to adjust to the new setting. Note: keeping the button 2 in position "+" or "-" speeds up the setting process on the display. Winter/summer time setting Keep the button 1 turned left or right for about 4 seconds. By turning button 2 in the direction "+" or "-" make adequate changes. Only hours may be changed, the settings of minutes and hidden seconds are not affected! 14 Instructions for Use The expiry of the set period is signaled by the alarm, which is switched off automatically after 7 minutes, if it was not switched off before by turning any of the buttons. When the sound alarm is triggered, the display indicates the current time and the symbols S1 and S2 are off. In case the sound alarm is stopped by turning any button to either direction, the symbol S1 reappears. If you wish to terminate roasting the oven must be switched off! level is sounded. [. . . ] This way of roasting is suitable for larger chunks of meat, possibly boneless. Bones make it difficult to measure the temperature precisely and often give wrong readings. Rabbits and poultry are therefore not recommended for probe roasting. Deleting all timer adjustments All the time settings except the alarm timer may be deleted at any time by pressing and turning button 1 to the position "manual". Preset programs are automatically cancelled and the clock returns to the conventional (manual) mode. Recommended inner temperatures of meat core Roast pork: 85°C Roast beef: 80°C Roast veal: 75°C Roast tenderloin: 40-55°C Using the clock in combination with oven To use the clock in combination with oven, the first step is to switch the oven on and set the desired baking mode and the temperature. [. . . ]