User manual GRANDSTREAM TR-069 INFORMATION

[. . . ] The message exchange is using SOAP (XML_RPC) for configuration and management of the device. The core defines the protocol, session establishment, message exchange structure, and Remote Procedure Calls. WHY USE TR069? Service Providers, using TR-069, can have one common platform to manage all Grandstream devices and other CPEs, no matter neither the device type nor the manufacturer. This common application was not easily achieved before due to CPE vendor's proprietary mechanisms for provisioning/management. TYPICAL SCENARIO: Grandstream Networks, Inc. TR-069 White Paper Page 2 of 7 Last Updated: 11/2010 Previous graph shows a common customer installation. [. . . ] Depending on the method parameters this can be called for complete and partial parameter paths on the device. This method is used by an ACS to obtain the value of one or more CPE Parameters. This method is used by an ACS to read the attributes associated with one or more CPE Parameter. This method is used by an ACS to modify the value of one or more of the device's Parameters. This method is used by the ACS to cause the CPE to download a specified file from the designated location. Filetype supported by Grandstream devices are: · · 1 Firmware Upgrade Image 3 Vendor Configuration File GetParameterValues GetAttributeValues SetParameterValues SetAttributeValues AddObject DeleteObject Reboot Download Grandstream Networks, Inc. TR-069 White Paper Page 3 of 7 Last Updated: 11/2010 TR104 DATA MODEL: This technical report defines the data model for provisioning of VoIP devices by an ACS using the mechanism defined in TR-069. All Grandstream devices are only SIP compatible, for this reason, only objects and parameters related to SIP are implemented from the Datamodel. Grandstream Networks, Inc. TR-069 White Paper Page 4 of 7 Last Updated: 11/2010 WHAT IS THE SCOPE OF THE REMOTE MANAGEMENT? · Auto-Configuration: This mechanism allows the Grandstream device auto-provisioning at the time of initial connection, and the ability to re-provision at any subsequent time. For initial ACS parameters provisioning please refer to the GAPS redirection service. Firmware Management: TR-069 provides tools to manage downloading of CPE software/firmware image files. The protocol provides mechanisms for version identification, file download initiation (ACS initiated downloads and optional CPE initiated downloads), and notification of the ACS of the success or failure of a file download. Configuration or environment variables changes notification:TR-069 provides support for a CPE to make available information that the ACS may use to monitor the CPE's status and performance statistics. This is done by defining the conditions under which a CPE should actively/passively notify the ACS of changes. Enabling / disabling features remotely: For example, VoIP accounts can be easily activated by sending a TR-069 RPC. Additionally other more advance applications as pushing contents or customizing the GUI can be done by using vendor parameters. [. . . ] Periodic Inform Enable: Set the Grandstream device to start a new session after "Periodic Inform Interval" Periodic Inform Interval: time in seconds where the CPE will initiate a new session against the ACS. Connection Request Username: Username to authenticate incoming connection requests. Connection Request Password: Password to authenticate incoming connection requests. Grandstream Networks, Inc. TR-069 White Paper Page 6 of 7 Last Updated: 11/2010 STANDARDS COMPLIANCE Currently Grandstream CPEs support the list of standards shown below. [. . . ]