User manual GRASS VALLEY K2 7.3.8 RELEASE NOTES AND UPGRADE INSTRUCTIONS

[. . . ] 071-8781-00 K2 Summit Production Client, K2 Solo Media Server, and K2 Summit SAN Version 7. 3. 8 Release Notes & Upgrade Instructions These release notes contain the most recent information and supersede previous publications, as of 23 November 2010. Check the Grass Valley website at www. grassvalley. com/docs for an updated version that contains additional important information. These release notes contain information for the following: · K2 Summit models with internal storage · K2 Summit models with direct-connect storage · K2 Solo Media Server · The K2 Storage Area Network (SAN) with connected shared storage K2 Summit Production Clients Documentation path to install K2 system with internal storage Release Notes Quick Start Guide System Guide Documentation path to install K2 client with shared or direct-connect storage ss V all ey K fl2 xx xx xxx xxx xxx xxx xx G ra x Release SAN Manual *Cabling System Notes (shared storage) Guide Guide *Cabling Guide packed with RAID primary chassis fl xx xx x fl xx xx x Quick Start Guide Copyright © Grass Valley, Inc. This document may not be copied in whole or in part, or otherwise reproduced except as specifically permitted under U. S. [. . . ] · NOTE: On a K2 system, if a SNFS version lower than 3. 0 is installed, do not uninstall using SiteConfig. Follow instructions in the release notes for your current version of K2 software. If you are upgrading multiple software components for which there is a required sequence, you must check and uncheck tasks and run multiple deployment sessions to control the sequence. For some software components, SiteConfig aids you by enforcing dependencies. For each individual software component, SiteConfig enforces an uninstall of the current version of software before installing the upgrade version. SiteConfig provides uninstall deployment tasks and install deployment tasks to indicate the taskflow. SiteConfig can do the uninstall/install in a single deployment session. In the Software Deployment | Deployment Groups tree view, select the device or the group of devices to which you are deploying software. The corresponding software deployment tasks are displayed in the Tasks list view. For the software you are deploying, select the Deploy check box in the row for the uninstall task. For the software you are installing, select the Deploy check box in the row for the install task. For upgrading SAN K2 clients to this release, configure Deploy check boxes as follows: Deploy Managed Package Action GrassValleyK2SummitSANClient xxxx. xxxx GrassValleyK2SummitSANClient 7. 3. 8. xxxx WFRegMon_SummitSANClient x. x. x Uninstall Install Install (there is no uninstall task for this software) Also, when upgrading SNFS, configure deployment tasks to upgrade (uninstall/install) SNFS. Deploy the following tasks at the same time: Deploy Managed Package Action SNFS Summit xxxxxx SNFS Summit 3. 5. 2. 1b15620 Uninstall Install NOTE: If there are dependencies, SiteConfig can enforce that some tasks be deployed together. 60 K2 Version 7. 3. 8 Release Notes & Upgrade Instructions 23 November 2010 Upgrading K2 systems 4. Check the area next to the Start Deployment button for a message. If a message instructs you to upgrade the Discovery Agent, on the control point PC go to the directory to which SiteConfig is installed, find the DiscoveryAgent_x. x. x. x. cab file, add it to the deployment group, and deploy the Discovery Agent software as well. Click the Start Deployment button. Deployment tasks run and software is uninstalled. Progress is reported and next steps are indicated in both the Status and Details columns. If an error appears regarding prerequisite software, install the prerequisite files on the control point PC and then repeat this step. When upgrading both K2 and SNFS software, SiteConfig uninstalls both in the proper sequence. When the Status or Details columns indicate next steps, identify the software in the row, then do one of the following: · For SNFS software, when Details displays a Restart required link, click the link and when prompted ". . . are you sure. . . ", click Yes. · For K2 software, if the version from which you are upgrading is lower than 7. 1. 0. 1153, do not restart. Instead, you must power cycle the K2 system, as instructed in the next task. · For K2 software, if the version from which you are upgrading is 7. 1. 0. 1153 or higher, when Details displays a Restart required link, click the link and when prompted ". . . are you sure. . . ", click Yes. [. . . ] Video faults continue to occur if Super Slo-Mo inputs lose and then regain phase alignment while recording is underway. If inputs lose phase alignment, first restore phase alignment and then stop and restart the recording. CR105208 Description: Workaround: CR108294 Description: Workaround: CR109197 Description: Workaround: CR110369 Description: Workaround: CR110998 Description: Workaround: Storage Utility CR101794 Description: Storage Utility does not open for a nearline SAN. This occurs when in K2 Config you select the name of the K2 SAN, which is the top node of the storage system tree, when attempting to open Storage Utility. In K2Config tree view, under the nearline SAN's K2 Media Server, select the File System Server node to open its property page. [. . . ]