User manual GRASS VALLEY K2 FCP CONNECT 2.0 INSTALLATION MANUAL

[. . . ] K2 FCP Connect Toolset Apple Final Cut Pro Integration with K2 systems Installation Manual Software Version 2. 0 071-8738-02 October 2010 Affiliate with the N. V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040. 001 The Quality System of: Thomson Inc, and its wor dwide Grass Valley division affiliates DBA GRASS VALLEY Headquarters 400 Providence Mine Rd Nevada City, CA 95959 United States Kapittelweg 10 4827 HG Breda The Nederlands Rue du Clos Courtel CS 31719 35517 Cesson-Sevigné Cedex France 40 Rue de Bray 2 Rue des Landelles 35510 Cesson Sevigné France Carl-Benz-Strasse 6-8 67105 Schifferstadt Germany 15655 SW Greystone Ct. Beaverton, OR 97006 United States 7140 Baymeadows Way Ste 101 Jacksonville, FL 32256 United States 1 rue de l'Hautil Z. I. des Boutries BP 150 78702 Conflans-Sainte Honorine Cedex France Spinnereistrasse 5 CH-5300 Turgi Switzerland 10 Presidential Way Suite 300 Woburn, MA 01801 United States 2300 So. [. . . ] If you have K2 Summit Production Client or K2 Solo Media Server and if the write filter is currently enabled, be aware that files on the desktop are lost on restart. Therefore do one of the following: · Save the License Request text file(s) to a different location. · Keep the K2 system running (do not restart) until after you have requested the license(s). Do one of the following: · Attach the License Request text file to an email. An email will be sent from Grass Valley to the return email address you specified; your SabreTooth software license will be provided as a text file. 22 October 2010 K2 FCP Connect Installation Manual 29 Installing and configuring K2 FCP Connect 10. Next add the license to the SabreTooth License Manager. Adding a license Your software license, Licenses_<SalesNumber>. txt, is provided as a text file. Use the License Manager to add this file to your system and enable the desired feature. Do one of the following: · Choose File | Import License and navigate to the file location to open the text file. You will now see the permanent license in SabreTooth, as well as any other licenses, permanent or temporary, that have been installed on this machine. You should save the permanent license to a backup system. Enable SabretoothWS service Do this task on the K2 system that is your Sabretooth licensing server for access to stand-alone K2 systems. Right-click Grass Valley SabretoothWS, open Properties and click the General tab. Click OK to save settings and close. Add Macintosh systems to K2 system hosts file 1. Following the convention in the hosts file, enter text in one line for each Final Cut Pro Macintosh system as follows: a) On a text line, type a Macintosh system's control network IP address. c) On that same text line after the space, type the machine name, such as MacClient01. This sets up the host file for resolving the machine name on the control network. 30 K2 FCP Connect Installation Manual 22 October 2010 Installing and configuring K2 FCP Connect 3. Copy the hosts file or otherwise make the hosts file accessible to each Final Cut Pro Macintosh system. Enable Access Control Lists on the K2 system Prerequisites for the K2 system are as follows: · · · · Current compatible versions of the Windows operating system and SNFS software. The SNFS configuration file is located in the D:\SNFS\config\ directory. If desired, you can enable Access Control Lists (ACLs). For stand-alone K2 storage access enable ACLs on the stand-alone K2 system. If you do this task, you must also configure Active Directory Domain on the Macintosh systems. If a redundant K2 SAN, take FSM K2 Media Servers out of service and manage redundancy as directed in documented procedures. Navigate to D:\SNFS\config\ and open the SNFS configuration file in a text editor. The file is named either default. cfg or gvfs_hostname. cfg where hostname is the name of the K2 system--if a redundant SAN, the name of the primary FSM. [. . . ] You can also change the licensing server, which is the machine to which the Macintosh system looks to get its license, with the following considerations: · For access to stand-alone K2 systems make the change here in the K2 FCP GV Connect Preferences. 22 October 2010 K2 FCP Connect Installation Manual 47 Using and maintaining K2 FCP Connect · For access to a K2 SAN, you should use K2Config, rather than the K2 FCP GV Connect Preferences, to change the licensing server. Stopping and starting the K2Config for Mac service 1. To start the K2Config for Mac service, click Start and then enter username and password with administrator privileges. To stop the K2Config for Mac service, click Stop, when prompted ". . . Are you sure. . . " click Yes, and then enter username and password with administrator privileges. When you stop the K2Config for Mac, the service is stopped permanently, even after the Macintosh system is restarted. [. . . ]