User manual HAIER H2F385SF

[. . . ] The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass this manual so that the new owner can become familiar with the appliance and safety warnings. The symbol indicates there is a risk of fire since flammable materials are used. [. . . ] 6 Temperature setting The temperature range of this freezer can be set between -14¥ ~ -24¥ When display is unlocked, in the daily function, press "Decreasing temperature setting"(A), after a beep "Temperature display" icon (a) starts to flash and enters the temperature setting mode. And then every time you press the "Decreasing Temperature Setting" (A), the buzzer beeps, the temperature is lowered by 1 ° C, and the lowest value is -24¥ After the temperature is set, the temperature set value is determined and stops flashing after 5 seconds without operation After the display is unlocked, in the Daily function, press" Increasing temperature setting" (G), after a beep, the icon"Temperature display" (a) starts to flash and enter temperature setting mode, and then every time you press "Increasing temperature setting "(G), the buzzer beeps, the temperature increases by 1¥, up to -14 ¥. After the temperature is set, the temperature set value is determined and icon (a) stops blinking after 5 seconds without operation. 7 Daily function (C) The appliance is under Daily function as soon as it is connected to the power supply for the first time, and "Daily" icon (c) lights up. 8 Super Freeze function (B) Super Freeze mode is optimal for preserving food nutrition, it could freeze food in less time. Before putting lots of food inside the freezer, activate Super Freeze function to have lower temperature, to make sure better freeze result. When display is unlocked, by touching "Super Freeze " (B), the Super Freeze icon (b) will be lig -ht, the freezer works in Super Freeze mode. If you have a large amount of food to freeze at one time, it is recommended that the fun -ction be activated 24 hours before inserting food. Under Super Freeze mode, freezer operating temperature varies depend on the amount of food load and ambient condition. Temperature inside freezer compartment could potentially be pulled down to -37°C. If you do so, Super Freeze icon will flash for 3 times to remind that the freezer is in Super Freeze mode. In the Super Freeze mode, if the Auto Set function or Holiday is set, "Super freeze" (b) is off, the Super Freeze function automatically exits, and the Auto Set or Holiday func -tion is entered. 9 Holiday function (D) When display is unlocked, by touching "Holiday" (D), the Holiday icon (d) will be light, the freezer works in Holiday function. In the Holiday mode, touching "Holiday" (D), the Holid -ay icon (d) is off, and the freezer exits the Holiday function. In the Holiday mode, if the temperature before entering Holiday is higher than -18 ¥, then after entering the Holiday function, the temperature is automatically set to -18 ¥; if the temperature before entering Holiday is lower than -18 ¥, then after entering the Holiday function, the temperature is unchanged. If you do so, Holiday icon will blink for 3 times to remind that the freezer is in Holiday mode. 10 Auto Set function (E) When display is unlocked, by touching "Auto Set" (E), "Auto Set" icon (e) is light, the freezer works in Auto Set function. In Auto Set mode, by touching "Auto Set" (E), icon (e) is off, and the freezer exits the Auto Set function. Under the Auto Set function, the freezer operates at -18 ° C setting. If you do so, Auto Set icon will blink for 3 times to remind that the freezer is in Auto Set mode. In Auto Set mode, if the Holiday, Daily or Super Freeze function is set, "Auto Set" (e) is off, the Auto Set function automatically exits and enters Holiday, Daily or Super Freeze function. 11 Display control function When the door is closed the display screen turns off automatically 30 seconds after without operation. [. . . ] To the maintenance-free lubrication oil is located in the This oil can get through the Closed pipe system during slanting transport. Connecting the appliance to the power supply you have to wait 2 hours (Fig. 5) so that the oil runs back into Before each connection check if: Power supply, socket and fusing are appropriate to the rating plate. Before connecting the appliance to the power supply you should check, whether the door swing must changed from left (as delivered) to right, if this is required by the installation location and the usability. [. . . ]