User manual HAIER NBFFMR02 11-04

[. . . ] 20" High Velocity Floor Fan with Remote Control User Manual THESE INSTRUCTIONS. Model # NBFFMR02 BEFORE OPERATING THIS PRODUCT, READ UNDERSTAND AND FOLLOW English IMPORTANT SAFEGUARDS Warning!When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: · READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. · To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device. [. . . ] Any other use not recommended by the manufacturer, such as commercial or industrial use, may cause fire, electric shock, or injury to persons. · Always unplug the fan before assembly or disassembly, when moving from one location to another, before cleaning, or whenever the fan is not in use. · To disconnect, grip the plug and pull it from the wall outlet. DO NOT operate without fan grills properly in place. SAVE THESE INSTRUCTIONS! WARNING: This fan is equipped with a polarized alternating current line plug (one blade is wider than the other). If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug. 1 English STAND ASSEMBLY 1. Align the hole of stand to the shock resistant block and tighten the flat washer and nut. Press ON/SPEED on the remote control or on the control panel to switch the fan on. The fan speed Low, Medium, or High can be selected by pressing SPEED on the remote control or on the control panel. To select the timer, press TIMER on the remote control or on the control panel and continue to press to cycle through the settings (0. 5 to 7. 5 hrs). Press OFF on the remote control or on the control panel to switch the fan off. To ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired angle. This high velocity fan can be used alone or in conjunction with air conditioning. Rotating the fan head upward serves to pull air from the floor and circulate it throughout the entire room. To replace batteries, press the indentations on back of the remote control and remove the cover, insert 2 AAA batteries inside the remote and replace cover. Control Panel HOW TO ADJUST TILT 1. [. . . ] (MAKE SURE THAT THE PRODUCT IS REMOVED FROM THE POWER OUTLET. ) Remove the rating tag/label from the back or bottom of the product. Return both items to the closest return center with a check for $5. 99 to cover shipping and handling. Haier Return Center 1356 Broadway New York, NY 10018 Issue: November. [. . . ]