User manual HAIER NBFTM125 11-04

[. . . ] To avoid fire hazard, NEVER put the cord under rugs, near heaters, radiators or stoves. · To avoid fire or shock hazard, plug the appliance directly into a 120 Volt AC electrical outlet. · To protect against electrical hazards, DO NOT immerse in water or other liquids. [. . . ] DO NOT operate without fan grills properly in place. SAVE THESE INSTRUCTIONS! WARNING: This fan is equipped with a polarized alternating current line plug (one blade is wider than the other). If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug. 1 English Features Diagram PART NAMES 1. To turn on the fan press one of the three speed buttons marked (1) low, (2) medium, or (3) high. The speed is adjusted by pressing one of the three buttons for your desired level of cooling. To start and stop oscillation of the fan head, press the oscillating button. To use the fan without the timer feature set the timer knob to "ON". If the timer knob is at "OFF", the fan will not work even when the speed buttons are depressed. Position mains lead in the centre channel of the rear base plate before lifting the front base plate and attach by sliding downwards. Turn the fan upside down (control panel touching the floor) and fix the body into the base and secure with the 2 screws. CLEANING FIRST UNPLUG THE CORD FROM THE SOCKET The fan can occasionally be wiped with a damp cloth. Never use abrasive or aggressive detergents, thus no scouring powder and no scouring sponges. The motor bearings are permanently sealed and do not require additional lubrication. SAFETY TIPS · This fan is intended for normal household use only. · Make sure the cord or extension cord is carefully positioned to avoid people tripping over it. [. . . ] This warranty gives you specific legal rights and you may have other rights, which vary by jurisdiction. If for any reason this product malfunctions, please follow the directions below and return the product to the manufacturer to receive areplacement product of equal or greater value. (MAKE SURE THAT THE PRODUCT IS REMOVED FROM THE POWER OUTLET. ) Remove the rating tag/label from the back or bottom of the product. [. . . ]