User manual HAIER TN131 AUV 07-00

[. . . ] Accessories -- do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. [. . . ] You will need it to obtain warranty service. 3 English Remote Control Functions 1. CHANNEL NUMBER BUTTON: Direct channel tuning (TV channel 02-69, CATV channel 01125. ) Features FRONT 1. AC CORD BACK 4 English Information to user: This television receiver is equipped with close caption decoder and parental blocking technology as required by the FCC. Defining VIDEO VIDEO parameters: * Press M (MENU) key and select VIDEO. · Press CH- and CH+ to select an item (menu will roll and show those hidden items with the action of the CH+ and CH-) · When a certain item is selected, it will be highlighted green, use VOL+ and VOL- to change the parameter to your preference. Item CONTRAST BRIGHT COLOR SHARP TINT VOL+ CONTRAST+ BRIGHTNESS+ COLOR+ SHARPNESS+ TINT+ VOLCONTRASTBRIGHTNESSCOLORSHARPNESSTINT- Getting Started With Personalized Setup Setting up this TV can be personalized, please refer to this manual. When the television is connected to power outlet, the power indicator displays red. To turn on the set press the ON/OFF button or press the on/off key on the remote controller. Press the M (MENU) key on the remote controller, you will see a menu on the screen. When a desired item is selected press VOL- and VOL+ to change its parameter. Defining Setup 1. Select the language you would like to see on your screen (ENGLISH, ESPANOL, FRANCAIS) with VOL+ and VOL-; 4. RECEPTION: the default parameter is AIR, which indicates the signal receiving method is through the antenna of the TV. AUTO PROGRAM, Pressing the VOL+ and VOL-, will automatically search for TV channels. (When available signal is detected, the channel will locked in to release the lock, press VOL+, and the search resumes) 6. ADD/DELETE use CH+ and CH-, press VOL- and VOL+ to add or delete TV channels to/from the program. This could also be done by pressing the AV/TV key on the remote controller. You can enter a 4 numeric password here to prevent your personal settings from possible changes by others. (Note: When a password is activated here, access to other menu under V-chip menu will require this pass word) Defining SPECIAL 1. Press CH+ and CH- to select SPECIAL, then select C. CAPTION, the selected item highlighted with green. When OFF displays, C. CAPTION is set off; When C1 displays, C. CAPTION is set active. Press CH-, highlight CC ON MUTE, press VOL+ and VOL- to adjust its contents, process similar to the above figure. When OFF display, no matter what is set for C. CAPTION, it will not work. Press CH- to select POWER RESTORE, press VOL+ and VOL- to configure this item. [. . . ] In no event shall Haier be liable, or in any way responsible for any damages or defects in the product which were caused by repairs or attempted repairs performed by anyone other than an authorized service center or dealer; nor shall Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you. The warranty period continues for a total of one year for parts only, other than the picture tube for which it continues for two years. Services are not provided free of charge for these additional periods. [. . . ]