User manual HAIER XIB 6B2S3FS

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. We recommend you always keep this manual to hand and in good condition for any future owner. Please check that the appliance is delivered with this instruction manual, the warranty certificate, the service centre address and the energy efficiency label. [. . . ] Press the "ON/OFF" button and hold for about In this phase only the "OPTIONS" "EXTRA dRY" and "START/RESET" buttons will remain active. The message "HAIER" will appear on the display and all the indicator lights will turn on for 3 secs. Pressing the "OPTIONS" and "EXTRA DRY" buttons you can select the preferred language. To accept the language selection press the "START/RESET" button Immediately afterwards the "WELCOME" message will scroll on the display once and the indicator lights will all be off. Press "START/RESET" and a signal will sound, the indicator light corresponding to the selected programme will stay on and the wash indicator light will come on. Close the door (after an audible signal has sounded, the programme will start automatically). WARNING In the event that the machine remains switched on without selecting or starting any program, after 5 mins. Next time you switch on the appliance Decided to use will appear on the display, saving it when the dishwasher is switched on. (To save the programme, see the specific paragraph "Memorising the last programme used"). SETTINGS MENU The dishwasher is regulated with certain factory settings. Nevertheless, from the Settings menu, you can adjust various parameters to suit your washing requirements. entering the Settings menu The dishwasher must ALWAYS be off before you start this procedure. Turn on the dishwasher by holding the The message "SETTINGS" will appear on the Display and the indicator lights of the "OPTIONS" and "EXTRA DRY" buttons will be on. Pressing the "PROGRAMME SELECTION" button you can select the parameters to be adjusted in succession (SOFTENER BUZZER MEMO FUNCTION). Press the "DELAY START" and "EXTRA DRY" buttons together for 3 seconds. To accept the language selection press the Hold down the ON/OFF button for about 3 secs to turn the machine on and the "ECO" programme or the programme you have Models with Smart Loading Sensor The " AUTO SENSOR " programme, thanks to an algorithm that analyses the degree of dirtiness of the dishes in real time, automatically sets the ideal temperature and washing time, optimising water and electricity consumption Models with dirt sensor (Only on some models). The dishwasher is equipped with a dirt sensor, capable of analysing water murkiness during all "AUTOMATIC" programme phases (see programme legend). Thanks to this device, the wash cycle parameters are automatically adapted to the real quantity of dirt on dishes. This is because water murkiness is linked to the quantity of dirt on dishes. Thus, excellent washing results are guaranteed while optimising water and energy consumption. "IMPULSE" PROGRAMMES (only on some models) The "IMPULSE" programmes use an impulse washing technology, which reduces consumption and noise, and improves performance. The "intermittent" working of the washing pump is NOT to be considered a malfunction; it is a characteristic of impulse washing, and therefore should be considered a normal feature of the programme. [. . . ] If the error occurs again contact an Authorised Customer Service Centre directly. If malfunctions or faults occur when a programme is running, the indicator light that corresponds to the selected cycle will blink rapidly, and an intermittent audio signal will sound. In this case, turn the dishwasher off by pressing the "ON/OFF" button. After checking to make sure the water supply is open, that the drain pipe is not bent and that the siphon or filters are not clogged, set the selected program again. [. . . ]