User manual HARMAN KARDON 230A

[. . . ] The 230A is a multipurpose five-disc player, capable of playing both DVD discs and conventional CD audio discs with the highest fidelity. To enable you to get the maximum quality from DVDs, the 230A is equipped with the latest in design techniques, including advanced 10-bit video digital-to-analog connectors (DAC) and component video outputs, to ensure that you get all the quality inherent in today's DVD medium. In addition, Harman Kardon's audio heritage continues into the digital video era with audiophile-grade AKM output DACs to ensure that the audio quality matches the superb video. Of course, both coaxial and optical digital audio outputs are available for direct connection to A/V receivers or processors so that you may take advantage of Dolby Digital* and DTS® soundtracks. [. . . ] Press PLAY to resume normal playback or RETURN to delete Set Up Menu display. Press ARROW (UP or DOWN) on the remote to select specific Audio Language. Press PLAY to resume normal playback or RETURN to delete Set Up Menu display. I You can exit the Audio menu at any time by pressing the ARROW (left). I If language selected is not available on disc, the language designated as default by each disc will be selected. I Note that when a default language is selected, it will be used whenever that language is present on the DVD disc being played. However, when that language is not present, the language used will be the one preprogrammed into the disc itself. (Typically, that default will be English, but the selection will vary at the discretion of the disc's producer. ) Although the default will set the language that will be used when a disc is first put into play, the language may easily be changed at any time by using the Audio Button. See page 25 for more information. SYSTEM SETUP 17 System Setup Subtitle Language Select Subtitle Language With this set up you define the default subtitle language (if disc was created with different language tracks). Choosing a subtitle language from the Banner Display (see page 25) will overwrite this setting only temporaily. Press ARROW (UP or DOWN) on the remote to select Subtitles on the SET UP MENU DISPLAY. The 230A is shipped without a password and with the settings for the password system unlocked. The following instructions will show how to add a password and to lock the settings. Input Password For disabling the playback of rated DVDs a password, consisting of four digits, must be entered: 1. Press ARROW (UP or DOWN) on the remote to select Password on the SET UP MENU DISPLAY. When the OK icon is highlighted, press ENTER to finish password input, Confirm Password display appears below the Enter Password Display. I After password is memorized, all password menus are available only after correct password is entered. If incorrect password is entered, new password menu appears where the correct password can be entered again. I Note that the time delay before the password can be re-entered will increase with each attempt. This prevents attempts to find the correct password by trial and error. I It's most important that you note the password in a safe place or remember it reliably as access to rated discs or rating/password menus or changing or clearing the password (see next pages) is not possible without entering the correct password. 6. Press the NUMBER (0~9) buttons on the remote to enter same password for confirmation. 3. [. . . ] To program the discs in the DVD5 for playback, follow these steps: Program Edit 1. In Stop mode, press PROGRAM on the remote, Program Edit Display appears. To delete any programmed Track, press ARROW (RIGHT or LEFT) on the remote to move Arrow icon to the playlist. Press ARROW (UP or DOWN) on the remote to select the Track to be deleted until it's highlighted (grey) and press CLEAR or select DELETE icon on the Program Edit Display and press ENTER, selected Track will be deleted. [. . . ]