User manual HARMAN KARDON AVR 20 MKII

[. . . ] When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. [. . . ] Picture adjustments should be made to your video display first, with this menu used only for fine-tuning. See the Advanced Functions section for more information. INITIAL SETUP Audio Input from source: Select this line to assign the correct analog or digital audio input to the source. Refer to Table A5 in the appendix, where you noted the physical audio input the source is connected to, and select the input here. If both analog and digital audio connections were made, select the digital input here, and select the analog input at the Audio Auto Polling line below. 6-/8-Channel Direct Inputs The 6-/8-Channel Analog Audio Inputs are used when playing certain multichannel discs, such as DVD-Audio, Blu-ray Discs, SACD and HD-DVD, on a player that decodes the audio and outputs it via its multichannel analog audio outputs but not via its HDMI output. HDMI-equipped multichannel disc player: · Connect the player's HDMI output to one of the AVR's HDMI Inputs. · Assign the HDMI Input to both the Audio and Video Input from source settings in the Source Info menu. HDMI-equipped multichannel disc player that does not output multichannel audio via an HDMI connection: · Connect the player's HDMI output and its multichannel analog audio outputs to one of the AVR's HDMI Inputs and to the AVR's 6-/8-Channel Analog Audio Inputs. · Assign the HDMI Input to both the Audio and Video Input from source settings in the Source Info menu. · Assign the 6-/8-Channel Analog Audio Inputs to the Audio Auto Polling setting in the Source Info menu. · When listening to DVD-Video discs, CDs or other materials outputting standard-definition digital audio, do nothing, as long as the HDMI Input is assigned to the Audio Input from source setting. Resolution from Source: This line, which is informational only, indicates the video format (NTSC or PAL) output by the source device. NTSC is the video format used for standard-definition television in the U. S. The PAL format is used in parts of 36 INITIAL SETUP Europe and elsewhere. The AVR 20 MKII is capable of detecting PAL video sources and converting them to the NTSC format for display on American televisions. Adjust Lip Sync: Use this adjustment to resynchronize the audio and video signals from a source to eliminate a "lip sync" problem. Lip sync issues can occur when the video portion of a signal undergoes additional processing in either the source or the video display that desynchronizes it from the audio. Select this line to display the Lip Sync adjuster by itself, enabling you to view the video while listening to the audio. Use the Back/Exit Button to exit, then return to the Setup Source line of the Main Menu and select the next source to configure. When you have finished configuring all sources, press the Back/Exit Button to clear the menus from view. You are now ready to begin enjoying your new receiver! Figure 51 ­ Adjust Lip Sync Change Name: Use this line to change the display name for your source. This can be useful if your source's device type is different from the available source names. [. . . ] THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE. Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream Inc. , shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from the Gnome Foundation or Bitstream Inc. , respectively. This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ]