User manual HARMAN KARDON AVR 25

[. . . ] s Do not place furniture or other heavy objects on the cord, and avoid dropping heavy objects on it. Also do not make a knot in the cord. MOVING THE UNIT Before moving the unit, be sure to unplug the power cord from the AC outlet and disconnect all wires to antennas and other components. TABLE OF CONTENTS Front Panel Controls . . 17 ENGLISH DO NOT OPEN THE CABINET Do not attempt to service this unit. Tampering with internal components can cause fire or shock, and may void your guarantee. [. . . ] An additional compact disc player, tape recorder, TV video cassette recorder (VCR), etc. VIDEO MONITOR JACK Connect this jack to the VIDEO INPUT jack of a TV/MONITOR. ENGLISH 11. REMOTE CONTROL OUT JACK Connect this jack to the REMOTE IN jack on a Harman Kardon component. You can control many other Harman Kardon components in your system using the AVR 25 remote commander. 5. CD INPUT JACKS Connect the output cables of a compact disc player to these jacks. 2. FM OUTDOOR ANTENNA An outdoor FM antenna may be used to further improve the quality of reception. Disconnect the indoor antenna before replacing it with the outdoor one. A 75/300 adaptor must be used only, if your antenna system has no 75 coaxial cable. 6. TAPE PLAY JACKS Connect the line output of your CASSETTE DECK to these jacks. 7. TAPE REC JACKS Connect the line input of your CASSETTE DECK to these jacks. 12. MULTI-ROOM REMOTE IN JACK Connect a Harman Kardon HE 1000 remote IR sensor to this jack. To listen to a program source other than cassette deck be sure to set the TAPE MONITOR button to OFF. Adjust the volume to a comfortable listening level with the VOLUME control or MASTER VOLUME UP/DOWN buttons on the remote control. For private listening, insert a 6, 3 mm plug of the headphone into the HEADPHONE jack. When the headphones are plugged in, sound from the speakers is cut off. MANUAL TUNING Auto tuning may not be possible if the broadcast signal is weak. Press the UP or DOWN TUNE/PRESET button until the desired station frequency is reached. When the button is kept pressed, the frequency changes continuously in sequence. MANUAL PRESETTING ENGLISH Up to 30 stations can be preset at random, regardless of the reception band. Tune in the station to be stored in memory using the auto or manual tuning. Select the preset number with the UP or DOWN TUNE/PRESET button or the numeric buttons on the remote while the MEMORY indicator is lit. When using the NUMERIC buttons on the remote, the station is stored in memory without pressing the MEMORY button again. When selecting single digit preset numbers with the NUMERIC buttons on the remote, press the corresponding number without pressing "0" first. Repeat steps 1 to 4 to preset other stations. LISTENING TO BROADCASTS Press the AM or FM button and use auto, manual or preset tuning to select a radio station. AUTO TUNING If broadcast signals are strong enough, auto tuning is possible. [. . . ] CD FUNCTION BUTTONS For a CD PLAYER: DISC (DISC SELECTOR is available for the Harman Kardon FL8400, FL8450CD changer), PLAY, PAUSE, STOP, BACKWARD SEARCH, FORWARD SEARCH, A-B and INTRO buttons are available. NOTE: For the Standby Button to work, the power switch on the AVR 25 must be set to ON. Automatic power on: When you press the input function buttons (CD, TUNER, TAPE, TV/AUX, VCR1, VCR2) in STANDBY mode, the power is automatically turned on and the function is selected. 9. INPUT FUNCTION SELECTOR Press the button to select the desired input function. [. . . ]