User manual HARMAN KARDON AVR 147

[. . . ] AVR 147 AUDIO/VIDEO RECEIVER OWNER'S MANUAL SAFETY INFORMATION label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. This product may be equipped with a polarized alternating-current-line plug (a plug having one blade wider than the other). [. . . ] For some sources, the Auto Poll feature is unnecessary and may be undesirable. For example, if your DVD player is stopped, you may not want to use the analog audio signal or you may have decided not to connect analog audio. Move the cursor to this line, and press the < /> Buttons until OFF appears, disabling the Auto Poll feature. With Auto Poll turned off, the receiver will only check for a signal at the audio input assigned to the source. DMP SETTING: If you select DMP/The Bridge as your source input, you will notice that the AUDIO IN line of the INPUT SETUP menu has been replaced by the option GO TO DMP SETTING. See Figure 53. Figure 52 ­ Retitling a Source Input Now you may use the //¤ Buttons to scroll through the alphabet in upper and lower case, as well as numbers and a variety of punctuation marks. When you have selected the desired character, press the > Button to move to the next space. Press the Set Button when you have finished spelling out the new display name for the source. COMPONENT IN: If you connected the source to one of the two component video inputs, make sure the correct set of inputs is displayed at this line. If it isn't, move the cursor to this line, and then press the > Button to change the setting. Figure 53 ­ Input Setup Menu Screen for DMP/The Bridge source Since The Bridge is connected to the AVR using a dedicated connection, it isn't possible to select a different audio input for this source. However, there are several special settings used only with The Bridge. Selecting GO TO DMP SETTING displays the DMP SETTING menu (see Figure 54). 31 INITIAL SETUP The remaining lines in the Input Setup menu activate the tone controls, and may be skipped at this time. We recommend leaving the tone controls at their factory defaults for most listening, in order to enjoy the sound mix created by your favorite movie and music artists. However, if your room or speakers have unusual characteristics, or simply as a matter of personal preference, see the Tone Controls section on page 34 for more information. You are now ready to begin enjoying your new receiver! Figure 54 ­ DMP Setting Menu Screen MODE: The first line of the DMP SETTING menu allows you to select whether the iPod will be used to listen to music (or other audio materials), or view videos or still images, if you have a video or photo iPod. REPEAT: Set REPEAT to ONE, ALL or OFF to repeat one track, all tracks in an album or playlist, or not to repeat any tracks. SHUFFLE: Set SHUFFLE to SONGS to play all songs on the iPod in random order. The ALBUMS setting plays all albums in random order, with each album's tracks played in album order. RESUME: Set RESUME to ON to resume playback of a track from the point where it was interrupted by turning off the AVR, switching sources on the AVR, or removing the iPod from The Bridge. Set RESUME to OFF if you wish to restart play from the beginning of the track after interruptions. NOTE: The Resume setting disables the Remember Playback Position setting that you may set for audio and video files using later versions of iTunes. Resume affects all files on the iPod until you manually change the setting either in the DMP SETTING menu or by using iTunes. CHARGE IN ST-BY: Your iPod battery may be charged while it is docked in The Bridge with the AVR turned on. [. . . ] 54 APPENDIX Appendix ­ Default settings, worksheets, remote product codes Table A1 ­ Source Input Setting Defaults Source Title Component Video Input Audio Input Comp V 1 Comp V 1 Comp V 2 Comp V 2 Comp V 2 Comp V 2 Comp V 1 Comp V 2 Comp V 1 DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 The Bridge/ DMP CD Tape Tuner INT. TUNER Comp V 1 Comp V 1 Comp V 1 6-Channel XM Coax 1 Coax 2 Optical 2 Analog Optical 1 Analog The Bridge/ DMP --Logic 7 5CH Music Analog Analog Tuner 6-Channel XM Auto Poll Surround Mode* On Logic 7 5CH Music Off Logic 7 5CH Music Off Logic 7 5CH Music On Logic 7 5CH Music On Logic 7 5CH Music On Logic 7 5CH Music On Logic 7 5CH Music On Logic 7 5CH Music --Logic 7 5CH Music --Logic 7 5CH Music --Logic 7 5CH Music *The default shown is the preferred surround mode for PCM and Analog audio sources. Table A2 ­ Speaker/Channel Setting Defaults Source Bass Manager: Global Left/Right Speaker Size Center Speaker Size Surround Speaker Size Subwoofer Left/Right Speaker Crossover Center Speaker Crossover Surround Speaker Crossover Subwoofer Crossover DVD Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right HDMI 1 Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right HDMI 2 Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right Video 1 Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right Video 2 Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right Video 3 Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right The Bridge/ DMP Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right CD Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right Tape Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right Tuner Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right 6-Channel Large Large Large Large Sub N/A N/A N/A N/A XM Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right Table A3 ­ Delay Setting Defaults Speaker Position Front Left Center Front Right Surround Right Surround Left Subwoofer A/V Sync Delay Distance From Speaker to Listening Position 10 Feet 10 Feet 10 Feet 10 Feet 10 Feet 10 Feet 0mS Your Delay Settings 55 APPENDIX Table A4 ­ Source Input Setting Source Title Video Input Component Video Input Audio Input The Bridge/ DMP --Tuner 6-Channel XM --DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 The Bridge/ DMP CD Tape Tuner INT. TUNER ------6-Channel XM Auto Poll Surround Mode --- --- --- Table A5 ­ Speaker/Channel Setting Source Bass Manager: Global Left/Right Speaker Size Center Speaker Size Surround Speaker Size Subwoofer Left/Right Speaker Crossover Center Speaker Crossover Surround Speaker Crossover Subwoofer Crossover Left/Right Channel Level Center Channel Level Surround Channel Level Subwoofer Channel Level DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 The Bridge/ DMP CD Tape Tuner 6-Channel N/A N/A N/A N/A N/A N/A XM The 6-channel inputs are "direct" inputs, meaning their signals are passed directly to the volume control without any bass management processing. Thus, the speaker sizes are always full range, and it isn't possible to adjust speaker size crossover. [. . . ]