User manual HARMAN KARDON CITATION TWELVE

[. . . ] Page 2 "Citation Warranty" Paragraph 2 i s modified to read: "The Citation warranty does not include repair or replacement of the wooden enclosure due to damage incurred after initial delivery or transportation charges to and from the factory or an authorized warranty station. " 2. [. . . ] Page 3 "Power Requirements" Revise item 3 to read: Locate black and brown wires attached to fuse post. Revise item 5 to read: Join the black/white wire you have just removed, with the brown wire removed in step 3 and solder together to the vacant lug provided on the lug strip. O n left channel, solder the 1650 ohm 10 watt resistor to this lug. 3. It has been our experience that very few speakers are rated in terms of sine wave (RMS) power. However, in the event your speaker i s rated according to this rigid specification, contact the speaker manufacturer for the comparable music power rating. Speaker Rating Average Program Material Fast Acting Fuse For 8 Ohm Speaker Fast Acting Fuse For 4 Ohm Speaker 4 0 Watts 5 0 Watts 60 Watts 8 0 Watts 100 Watts 150 Watts 200 Watts 1. 0 AMP 1. 0 AMP 1 . o A M P 1. 5 AMP 1. 5 AMP 1. 5 AMP 1. 5 AMP 1. 5 AMP 1. 5 AMP 1. 5 AMP 2. 0 AMP 2. 0 AMP 2. 0 AMP 2. 0 AMP 'The speaker fuse should be in the positive speaker line and located at or near the speaker input terminals. The fuse and fuse holder can be obtained at any electronic supply store. [. . . ] The fuse and fuse holder can be obtained at any electronic supply store. [. . . ]