User manual HARMAN KARDON CONCERTO-TP200-

[. . . ] [. . . ] The receiver allows non-audiophile consumers to add high-quality audio to new, high-definition video sources such as Blu-ray DiscTM technology. Key Specifications Audio section ­ continuous average power (FTC), (stereo mode): 50 watts per channel into 8 ohms @ 20Hz ­ 20kHz, <0. 07% THD, both channels driven; (seven-channel surround-sound mode): 110 watts per channel into 6 ohms @ 1kHz, <0. 1% THD, one channel driven; 35 watts per channel into 8 ohms @ 20Hz ­ 20kHz, <0. 07% THD, all channels driven; high instantaneous current capability (HCC): ±25 amps Tuner ­ usable sensitivity: IHF 1. 3V/13. 2dBf; THD at 1kHz with 100% modulation, (mono): 0. 2%; (stereo): 0. 3%; FM adjacent-channel selectivity: ±400kHz, 70dB; ultimate (maximum) S/N ratio (measured at 1mV RF input level), (mono): 70dB; (stereo): 68dB Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 10. 5kg Depth measurement includes knobs, buttons and terminal connections, unless stated otherwise; height measurement includes feet and chassis, unless stated otherwise. Highlights Dolby® TrueHD decoding Logic 7® (5. 1 and 7. 1) processing DTS-HD Master AudioTM decoding HDMITM repeater EzSet/EQTM equalization HDTV-ready Component-video inputs Quadruple-crossover bass manager High-current capability 192kHz/24-bit DACs CONCERTO-TP200- 7. 1-channel A/V receiver with HDMITM repeater Features Power 110W x 7 into 6 ohms, 1kHz, at <0. 1% THD, one channel driven 35W x 7 into 8 ohms, 20Hz ­ 20kHz, at <0. 07% THD, with all channels driven simultaneously High-current (±25 amps), ultrawide-bandwidth (10Hz ­ 100kHz) amplifier design Connectivity Three HDMI inputs and one HDMI output with 12-bit Deep Color and xvYCC pass-through Two assignable, wide-bandwidth (50MHz), HDTV-ready component-video inputs and one output Subwoofer output for direct connection to a powered subwoofer Four A/V inputs, plus two audio-only inputs Eight-channel direct inputs for use with external surroundsound decoders Convenient front-panel audio/video input for use with video games or portable players Six digital inputs (two optical and two coaxial on rear panel, and one optical and one coaxial on front panel) One coaxial digital output on rear panel USB port for firmware upgrades Auxiliary input for connecting portable media players Surround-Sound Processing Full suite of Dolby surround-sound decoding, including Dolby TrueHD and Dolby Digital Plus using an advanced Cirrus Logic® CS 49700 32-bit DSP processor Full suite of DTS® modes, including DTS-HDTM, DTS-HD Master Audio, DTS-ES® 6. 1 Discrete & Matrix, DTS Neo:6® and DTS 96/24TM Dolby Pro Logic® IIx (Movie, Music and Game modes) surround sound Harman-exclusive Logic 7 Movie, Music and Game surroundsound processing in 5. 1 and 7. 1 channels Headphone and Virtual Speaker surround-sound modes Five- and seven-channel Stereo, Hall and Theater surroundsound modes 192kHz/24-bit DACs Ease of Use HDMI with audio processing and 1080p loop-through Adjustable A/V sync delay EzSet/EQ equalization for quick and accurate system setup FM stereo/AM tuner with 30 presets and direct-access tuning Quadruple-crossover bass manager Wide range of low-frequency crossover points (40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz) available On-screen interface via composite-video output Programmable power-up volume Seven-device, preprogrammed system remote control Harman Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www. harmankardon. com © 2010 Harman International Industries, Incorporated. DTS, DTS-ES and DTS Neo:6 are registered trademarks, and DTS-HD, DTS-HD Master Audio and DTS 96/24 are trademarks, of DTS, Inc. Features, specifications and appearance are subject to change without notice. [. . . ] [. . . ]