User manual HARMAN KARDON DL 240HD

[. . . ] Harman Kardon Digital Lounge 232 EX/240 HD OWNER'S MANUAL ENGLISH Table of Contents Page 3 Introduction 4 Safety Information 5 Installation Location, Cleaning, Unpacking 6 Terminology 7 Features 8 Front Panel Controls 9 Front Panel Display 10 Rear Panel Connections 12 Rear Panel Connections TV 14 Remote Control 17 Second Remote Control 18 Basic Information 18 About This Manual 18 Regional Coding System Connection 19 Installation and Connections 19 Equipment 19 Optional Set Top Box or Cable Box Connections 20 Connecting a PC 20 Optional Audio Connections 20 Speaker Placement 21 Screen Placement 21 Connecting AC Power 21 First Turn On 21 Automatic Channel Search 22 Digital Tuner 23 Basic Playback 24 Disc Playback Features 24 Skipping tracks or titles/chapters 24 Fast Motion Playback/Fast Search 24 Freeze Frame and Frame Advance (with DVD only) 24 Slow Motion Playback (with DVD only) 24 About DivX Movie Files System Setup 25 System Defaults 25 General Functionality of the User Interface 25 Setup Menu for Screen 26 TV Setup 27 Analog TV Search 28 DVD Setup 28 Picture Calibration 29 HDMI Setup 29 DVI Setup 29 Component, S-Video, Composite, Scart 1 and 29 30 30 30 30 30 30 30 30 30 30 30 31 31 31 31 31 31 31 31 Scart 2 Setup General Setup Setup Menu for DVD Receiver System Settings Display Language Preferred Subtitle Language Panel Time-Out Status Bar Time-Out Parental Control Disc Recognition PBC Support Screen Saver Show Angle Icon Audio Settings Preferred Audio Language Dynamic Range Tone Control Bass Level Treble Level DVD Sound Mode Audio Adjustment Video Settings Video Mode DivX Video On Demand Test Screen 33 Picture Calibration with Test Disc Player Menu 34 Using the Status Bar Menu 34 On Screen Display Menus 34 Disc Player Menu 35 Information Displays 35 Programmed Play Radio Menu 35 Radio Menu 36 Rearranging the station list 36 Selecting presets 36 Removing presets 36 RDS Station ID 36 Surround Mode for Tuner TV Menu, AUX Menu, Digital In Menu 37 TV Menu 37 AUX Menu 37 Digital In Menu 38 Surround Mode Chart USB Menu / The Bridge 38 USB Menu 39 The Bridge 39 TV Functions 39 Changing Channels 39 Picture-In-Picture (PIP) Function 40 Aspect Ratio 40 Teletext Remote Control 41 Learning Codes 41 Erasing Learned Codes DVD Languages Codes 42 Languages Codes Troubleshooting 43 Troubleshooting Glossary 45 Glossary Specifications 46 Specifications Declaration of Conformity We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château-du-Loir, FRANCE declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN 55013:2001 + A1:2003 EN 55020:2002 + A1:2003 EN 61000-3-2:2000 EN 61000-3-3:1995 + A1:2001 EN 60065:2002 Jurjen Amsterdam Harman Consumer Group, Inc. 03/08 Typographical Conventions In order to help you use this manual with the remote control, front-panel controls and rear-panel connections, certain conventions have been used. EXAMPLE ­ (bold type) indicates a specific remote control or front-panel button, or rear-panel connection jack EXAMPLE ­ (OCR type) indicates a message that is visible on the front-panel information display 0 ­ (number in a square) indicates a specific front-panel control 0 ­ (number in a circle) indicates a rear-panel connection 0 ­ (number in an oval) indicates a button or indicator on the main remote control A ­ (letter in a square) indicates an indicator on the front panel display A ­ (letter in a circle) indicates a rear-panel connection on the TV A ­ (letter in an oval) indicates a button on the small remote control The appearance of the text or cursor for your receiver's on-screen menus may vary slightly from the illustrations in this manual. [. . . ] The TV Set Up Menu will be replaced temporarily by a Mini Bar on the right top of the screen, allowing you to verify the changes made to the picture emission setting in real time. To change the setting press any of the N or M Buttons 9 until the right picture emission setting has been reached. Press the Enter Button 6 to return to the calibration process or the Red Button N to return to your TV channel. Dynamic Noise Compensation: The next line in the picture calibration process is the Dynamic Noise Compensation Setting. With this setting you can compensate for possible noise that is detected in any analog video signal. Should you wish to change this setting, press the Enter Button 6 once it is highlighted. The TV Set Up Menu will be replaced temporarily by a Mini Bar on the right top of the screen, allowing you to verify the changes made to the dynamic noise compensation setting in real time. To change the setting press any of the N or M Buttons 9 until the right dynamic noise compensation setting has been reached. Press the Enter Button 6 to return to the calibration process or the Red Button N to return to your TV channel. Aspect Ratio: The next line in the picture calibration process is the Aspect Ratio Setting, defining in what format you watch a specific video input. Should you wish to change this setting, press the Enter Button 6 once it is highlighted. The TV Set Up Menu will be replaced temporarily by a Mini Bar on the right top of the screen, allowing you to verify the changes made to the aspect ratio setting in real time. To change the setting press any of the N or M Buttons 9 until the right settings has been reached. Press the Enter Button 6 to return to the calibration process or the Red Button N to return to your TV channel. The aspect ratio can also be changed directly (and individually for each input) by pressing the Screen Format Button X. The second line in this menu depends on your choice of TV tuner. If you have selected a DVB tuner, the DVB-T Setup line will appear, allowing you to access the DVB T system Settings Menu, as described on page 22-23. If you use the analog TV tuner, the Automatic Search and Manual Search menu lines will appear. Figure 2c Picture Calibration The first submenu is the Picture Calibration Submenu that allows you to calibrate the picture of your TV. With the TV Set Up Menu on the screen, press the L Button 9 until the Picture Calibration text line is highlighted. Press Enter 6 to select, followed by pressing the N Button 9 to access the different calibration settings. Contrast: The optimal contrast setting will depend of your preference and the surrounding light in the TV room. Should you wish to change this setting, press the Enter Button 6 once it is highlighted. The TV Set Up Menu will be replaced temporarily by a Mini Bar on the right top of the screen, allowing you to verify the changes made to the contrast setting in real time. [. . . ] Furthermore, the data capacity of a dual-layer and single-sided DVD is 8. 5 GB, a single-layer and double-sided DVD 9. 4 GB, and a dual-layer and double-sided DVD 17 GB. The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. The DVD also uses the variable rate coding technology that changes the data to be allocated according to the status of the picture. The audio data is recorded in Dolby Digital, DTS and/or PCM, allowing you to enjoy more natural audio presence. [. . . ]