User manual HARMAN KARDON FL 8380

[. . . ] FL 8380 Compact Disc Changer OWNER'S MANUAL FL 8380 Standby Phones Phones Level ® ® Power for the Digital RevolutionTM Table of Contents 3 4 5 6 7 9 10 10 10 11 11 11 11 11 12 12 12 13 13 13 13 13 14 15 Introduction Information Front Panel Controls Rear Panel Connections Remote Control Functions Installation and Connections Operation Loading Discs Normal Play Random Play HDCD® Play Exchange Time Display Headphone Listening Search Skip Intro Search Programmed-Play Operation Programmed Play Checking Program Contents Clearing Programs Repeat Play Troubleshooting Guide Technical Specifications Declaration of Conformity We, Harman Consumer International 2, route de Tours 72500 Chateau-du-Loir FRANCE declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN 60065:1993 EN 55013/A12/8. 1994 EN 55022/5. 1995 EN 55020/12. 1994 EN 61000-3-2/4. 1995 EN 61000-3-3/1. 1995 Carsten Olesen Harman Consumer International Chateau-du-Loir, FRANCE. 09/00 Typographic Conventions In order to help you use this manual with the remote control, front panel controls, rear panel connections and front panel displays, certain conventions have been used. EXAMPLE ­ (bold type) indicates a specific remote control or front panel button, or rear panel connection jack EXAMPLE ­ (OCR type) indicates a message that is visible on the front panel information display EXAMPLE ­ (bold type) indicates a lit indicator in the front panel information display 0 ­ (number in a square) indicates a specific front-panel control 0 ­ (number in an oval) indicates a button or indicator on the remote 0 ­ (number in a circle) indicates a rear-panel connection ® , HDCD ® , High Definition Compatible Digital® and Pacific MicrosonicsTM are either registered trademarks or trademarks of Pacific Microsonics, Inc. , in the United States and/or other countries. HDCD system manufactured under license from Pacific Microsonics, Inc. 2 TABLE OF CONTENTS Introduction Thank you for choosing Harman Kardon. [. . . ] Note that the StatusMode Indicator 1 will turn green and the Information Display C will illuminate. The word d i s c will flash in the Information Display, and the disc tray will automatically turn clockwise so that the FL 8380 can sense which, if any, of the disc positions already have a disc. To load a disc, first press the Open/Close button 5, taking care to make certain that the space in front of the drawer is not obstructed. Note that if the drawer is blocked when you attempt to open it, it will automatically close within five seconds to protect the mechanism. Load discs in the tray with the printed (label) side facing up toward you. When a 8cm (3") disc is played, it should be carefully centered within the smaller ridges on the tray. When a 8cm (3") disc is played, DO NOT place a standard 12cm (5") disc over the smaller disc. Labeled surface Note that each disc position has a number embossed in the plastic tray. This corresponds to the position this disc will occupy for playback and programming. To make it easier to identify each disc's position, the disc position number for the holder space that is in the center of the disc tray will also appear in the Information Display when the disc drawer is open. To rotate the disc tray to another position, press the Disc-Skip button A D. The tray will revolve to the next slot and the Information Display will indicate the position number for the slot in the middle of the tray. When the drawer closes all trays will be checked for discs and the disc that was last in the center position on the tray will be readied for play. Its number will appear in the Information Display and a red icon will light to the right of the disc number. The numbers for all other tray positions that have a disc will also light in the upper part of the display. If the center disc position is empty when the drawer is closed, the unit will search for the next position with a loaded disc, and place it in the ready mode. The drawer may also be closed and the FL 8380 put into play by pressing the Play/Pause button 9 6. To close the drawer and play a specific disc, press the Disc Select button B 0 corresponding to the tray position number for the disc you wish to play. When the disc drawer is closed, the Information Display will display the number of the disc selected, the total number of tracks on the disc and the disc's total running time. In the upper area of the display the numbers of all loaded trays will be shown, with a red icon to the right of the selected disc´s number. The total number of tracks on the disc selected will illuminate at the far right side of the display. To remove a disc from the player, press the Open/Close button 5. Press the DiscSkip button A D to rotate the disc carousel tray to reach discs that may be covered. Upon placing a disc in a tray, the disc number will appear when detected by the sensor mechanism after the drawer has closed. [. . . ] The selected disc will play through to the end and then continue to repeat until the Stop button 8 5 is pressed. Repeat All Discs To repeat all of the discs that have been loaded into the FL 8380, press the Repeat button C three times so that the REPEAT, ALL and DISC indicators are lit. Press the Play button 6, (Play/Pause 9 on the front panel) and the unit will play all tracks on all discs, starting with the disc that has been loaded in the play position. When all discs have played through, the sequence will repeat and the discs will continue to play until the Stop button 8 5 is pressed. [. . . ]