User manual HARMAN KARDON HD7500 II

[. . . ] We ask that you take a few minutes to read through this Owner's Manual to familiarize yourself with the controls and functions. This brief investment of time will yield dividends in the form of years of listening pleasure. If you have any questions about this product, its installation or operation, please contact your dealer, as they are your best source of local information. Description and Features s Five-Disc CD Changer With Advanced Programming Features That Create Play Lists of Selected Tracks or Play Discs and Tracks in Random Order for Hours of Uninterrupted Play s Digital Output for Direct Connection to Outboard Digital-to-Analog Converters Intro Search to Automatically Scan a Brief Portion of Each Track to Quickly Locate Your Favorite Selections Play Exchange Feature Allows Discs To Be Changed While Another Disc Is Playing s s Safety Information 2 Important Safety Information Verify Line Voltage Before Use Your HD7500 II has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard, and may damage the unit. [. . . ] If the CD drawer is open, pressing this button will automatically close the drawer. i Random Button: Press this button to put a disc into play, and to have all of the tracks played in a random order. (See page 11 for more information. ) j Pause Button: Press this button once to momentarily stop a disc. When the button is pressed again, the disc will resume play at the point it was stopped. k Intro Button: Press this button to put the HD7500 II into the Intro Scan mode. When you press this button, the unit will play the first 15 seconds of each track on the disc, and then move to the next track. Press the button again to defeat the function and continue full play of the current track. (See page 12 for more information. ) l Time Button: Press this button to select the time display. In normal operation, the display will show the running time of the track being played. Press the button once to check the time remaining for the track in play. Press the button a third time to view the total play time remaining for the disc in play. When a 3" (8cm) disc is played, it should be carefully centered within the smaller ridges on the tray. When a 3" (8cm) is played, DO NOT place a standard 5" (12cm) disc over the smaller disc. Labeled surface Note that each disc position has a number embossed in the plastic tray. This corresponds to the position this disc will occupy for playback and programming. To make it easier to identify each disc's position, the disc position number for the holder space that is in the center of the disc tray will also appear in the Information Display when the disc drawer is open. To rotate the disc tray to another position, press the Disc Skip button * p. The tray will revolve clockwise to the next slot, and the Information Display will indicate the position number for the slot in the middle of the tray. When the drawer closes, the disc that was last in the center position on the tray will be readied for play. Its number will appear in the Information Display, and a flashing red line will surround the icon for that disc. The icons for all other tray positions that have a disc will be surrounded with a blue line. If the center disc position is empty when the drawer is closed, the unit will search for the next position with a disc loaded, and place that spot in the ready mode. The drawer may also be closed and the HD7500 II put into play by pressing the Play button $ h. [. . . ] Once the PROGRAM indicator is lit, P-01 will appear in the Information Display, replacing the track time. This indicates that you are about to program the first track. Press the Disc Select button ( b to choose the first disc to be programmed, and note that ALL will flash in the Information Display. To have all tracks on the disc play in order as the first program step, press the Program button ) n. To select a single track on the disc, press the Numeric buttons c corresponding to the desired track. [. . . ]