User manual HARMAN KARDON HD7525

[. . . ] This brief investment of time will yield dividends in the form of years of listening pleasure. If you have any questions about this product, its installation or operation, please contact your dealer, as they are your best source of local information. Description and Features s Five-Disc CD Changer With Advanced Programming Features That Create Play Lists of Selected Tracks or Play Discs and Tracks in Random Order for Hours of Uninterrupted Play s HDCD® Decoding Provides Superior Reproduction of All CDs, Whether HDCD Encoded or Not. When HDCD Encoded Discs Are Played, Special Circuitry is Used to Reveal Detail and Fidelity Not Possible in Ordinary CDs Digital Output for Direct Connection to Outboard Digital-to-Analog Converters Intro Search to Automatically Scan a Brief Portion of Each Track to Quickly Locate Your Favorite Selections Play Exchange Feature Allows Discs To Be Changed While Another Disc Is Playing s s s Safety Information 2 Important Safety Information Verify Line Voltage Before Use Your FL8550 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard, and may damage the unit. [. . . ] k Intro Button: Press this button to put the FL8550 into the Intro Scan mode. When you press this button, the unit will play the first 15 seconds of each track on the disc, and then move to the next track. Press the button again to defeat the function and continue full play of the current track. (See page 13 for more information. ) l Time Button: In normal operation, the display will show the running time of the track being played. Press the button once to check the time remaining for the track in play. Press the button again to view the total play time remaining for the disc in play. m Clear Button: Press this button to remove tracks from a programmed sequence. Each press of the button will remove one track, starting with the last track programmed to play. (See page 13 for complete information on programming the FL8550. ) n Program Button: This button is used to program the playback of a disc in a particular order. (See page 14 for complete instructions on programming the FL8550. ) o Repeat Button: Press this button once to constantly repeat the track currently being played. (See page 15 for more information. ) p Disc Skip Button: Press this button to change to the next disc. The tray will revolve clockwise to the next slot, and the Information Display will indicate the position number for the slot in the middle of the tray. When the drawer closes, the disc that was last in the center position on the tray will be readied for play. Its number will appear in the Information Display, and a flashing red line will surround the icon for that disc. The icons for all other tray positions that have a disc will be surrounded with a blue line. If the center disc position is empty when the drawer is closed, the unit will search for the next position with a disc loaded, and place that spot in the ready mode. The drawer may also be closed and the FL8550 put into play by pressing the Play button $ h. To close the drawer and play a specific disc, press the Disc Select button ( b corresponding to the tray position number for the disc you wish to play. When the disc drawer closes, the Information Display will briefly display the disc number, the total number of tracks on the disc and the disc's total running time. After five seconds, the display will indicate the disc number that is in the play position, both by a flashing red line surrounding the disc's icon and the wording in the display, such as disc 5. The total number of tracks on the disc will illuminate at the far right side of the display. 1 DISC 2 TRACK 3 4 MIN 5 SEC 12345 6 7 8 9 10 11 12 To remove a disc from the player, press the Open/Close button !Press the Disc Skip button * p to rotate the disc carousel tray to reach discs that may be covered. [. . . ] Once the PROGRAM indicator is lit, P-01 will appear in the Information Display, replacing the track time. This indicates that you are about to program the first track. Press the Disc Select button ( b to choose the first disc to be programmed, and note that A L L will flash in the Information Display. To have all tracks on the disc play in order as the first program step, press the Program button ) n. To select a single track on the disc, press the Numeric buttons c corresponding to the desired track. [. . . ]