User manual HARMAN KARDON PM650 VXI

[. . . ] The PM650 VXI CD changer is an exceptionally well-engineered product that offers high performance and ease of use. We ask that you take a few minutes to read through this Owner's Manual to familiarize yourself with its controls and functions. This brief investment of time will yield dividends in the form of years of listening pleasure. If you have any questions about this product ­ its installation or operation ­ please contact your dealer, who is your best local source of information. [. . . ] If the PM650 VXI is installed behind a cabinet or other obstruction that may block the path between the front-panel Remote Sensor D and the location of the remote, an optional external IR sensor may be used. This jack may also be connected to the IR-Output jack of another compatible Harman Kardon component or a compatible IRsystem- remote product. You may also use the IR Sensor in the PM650 VXI to send commands to other compatible remote controlled products. Connect the Remote IROut jack 2 to the input of the other product or system. Connect the power to a nonswitched AC wall outlet or to the accessory outlet on the rear of another audio device in your system and you are ready to go!NOTE: When using the accessory outlet on another product to power the PM650 VXI make certain that it has the compatibility to power a device that draws at least 20 watts of current in addition to being able to handle the requirements of the other devices that may be plugged into the accessory outlets. If you use a "switched" outlet, it is important to remember that the host product must be turned on in order for the PM650 VXI to operate. © INSTALLATION AND CONNECTIONS 9 Operation Loading Discs To load a disc, first turn the PM650 VXI on, using the Standby Switch 0. Note that the StatusMode Indicator 1 will turn green and the Information Display C will illuminate. The word d i s c will flash in the Information Display, and the disc tray will automatically turn clockwise so that the PM650 VXI can sense which, if any, of the disc positions already have a disc. To load a disc, first press the Open/Close button 5, taking care to make certain that the space in front of the drawer is not obstructed. Note that if the drawer is blocked when you attempt to open it, it will automatically close within five seconds to protect the mechanism. Do not lift the player while the disc tray is opening or closing, as this may cause the discs to unseat from the tray and possibly jam. Note: Always remember to remove all discs from the player before moving or repacking it. Recorded surface 10 OPERATION Operation Normal Play The PM650 VXI provides a variety of ways to select discs for playback. To play all of the tracks on each disc in order, starting with the first track on the disc currently in the play position, and proceeding through each disc that has been loaded, press the Play/Pause button 9 on the front panel, or the Play 6 button on the remote. To start play on a specific disc, press the DiscSelect button B 0 that corresponds to the desired disc's position in the disc tray. When a disc is in play, the Information Display will show a play indication fl. The track being played will show both as a large number in the middle of the display and as a smaller, flashing number at the right side of the display. The elapsed time of the track being played will appear in the display. As the disc plays, the track numbers will change, and the time will reset to at the start of each new track. To momentarily pause the play of a disc, press the Play/Pause button 9 on the front panel, or the Pause 8 button on the remote. Note that a Pause indication ± will appear in the display to remind you that the disc is paused. Press either the Play button (Play/Pause on front panel) 96 or the Pause button 8 to resume normal play. [. . . ] The Repeat Track mode may also be activated while the unit is stopped by selecting the desired track using the Disc-Select buttons B 0 and then the Skip buttons 7 4 or the Numeric buttons 1 as outlined on page 11. When the track is chosen, press the Repeat button C on the remote control and the Play button 6 (Play/Pause 9 on the front panel). Repeat Disc Play To repeat an entire disc, press the Repeat button C twice so that the REPEAT and DISC indicators are lit. Press the appropriate Disc Select button B0, the desired disc's icon lights and the disc number appears in the Information Display C. [. . . ]