User manual HARMAN KARDON THE BRIDGE III

[. . . ] If your iPod or iPhone does not appear in Table 1 and did not include an adapter, contact Apple Inc. step Five: Remove the iPod or iPhone from any case, and dock it in The Bridge III, as shown in Figure 2. table 1 ­ select the Correct the Bridge III Insert The Bridge III Insert NANO 5G (VIDEO 60GB) 5G (VIDEO 30GB) 13 12, 14 iPod Model iPod nano, 1st and 2nd generation iPod, 5th generation (60GB, 80GB) and iPod classic (160GB) iPod, 5th generation (30GB) and iPod classic (80GB) iPod nano, 3rd and 4th generation iPod touch ­ install large bumper; iPhone and iPhone 3G ­ install small bumper 3 English OPERATIOn UsIng DOCKIng statIOn When The Bridge IIIs connected to its proprietary input on the AVR and the iPod or iPhone is docked, you may play the audio, video and still-image materials on your iPod or iPhone through your high-quality audio/video system; operate the iPod or iPhone using the AVR remote or the AVR's front-panel controls; view navigation messages on the AVR's front panel or a connected video display; and charge the iPod or iPhone. When the source The Bridge is selected and an iPod or iPhone is docked, the message "The Bridge" appears in the front-panel Message Display. [. . . ] · Before attempting to view photos or videos stored on your device, check the Video Settings menu on the device and make sure that the TV Out setting is On. The TV Signal setting should be NTSC/PAL, to match the capabilities of your video display. If your selection was playing and is paused, the iPod or iPhone requires you to reselect the video for the new TV Out setting to take effect. · If you do not see the Videos line in the menu, and the iPod supports video browsing and has video content stored on it, you may need to turn off the AVR, remove the iPod from The Bridge III, reset the iPod, turn the AVR back on and dock the iPod again. An iPhone may not need to be reset, as simply undocking and redocking it may resolve the problem. This procedure may also help when a video program is selected but the "Now Playing" screen appears instead of the video images. To exit iPod Manual Mode, with the AVR remote in The Bridge mode, press the Menu Button. To return to a previous menu level, press the Back/Exit Button or the M Button. Random: Select this setting for random playback, also known as "Shuffle Mode". Each press of the OK Button switches the setting: shuffle by Song, shuffle by Album, or Off to end random playback. Repeat: Select this setting to repeat a track or all tracks in the current album or playlist. Each press of the OK Button switches the setting: repeat Off, repeat One or repeat All. nOtE: The iTunes application allows you to exempt some tracks from Shuffle mode. The AVR supports audio playback from some applications available for the iPhone and the iPod touch. [. . . ] sOlUtIOn · Make sure that The Bridge III is properly connected to a compatible Harman Kardon receiver. · Make sure that The Bridge is selected as the input on the receiver. sPECIFICatIOns: Dimensions (H x W x D): 1-3/16" x 4-1/2" x 4-1/2" (30mm x 114mm 114mm) Weight: 0. 37 lb (0. 17kg) © 2009 Harman International Industries, Incorporated. Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. [. . . ]