User manual HAWKE 377 ASSEMBLY AI284 ISSUE C 02-06

[. . . ] [. . . ] BAS 04 ATEX 0168X Operating temperature range -40°C +75°C II 2 GD EExe II Assembly Instructions AI 284 Issue C - 02/06 International APERTURE ACCEPTANCE DETAILS: Diameter: 20 - 20. 7mm / Thickness 2 - 3mm NOTE: No tools are required during the installation or removal of the plug. When installed in accordance with the installation instructions, the plug will maintain an IP 66 degree of protection. INSTALLATION A Ensure hole is free from debris and burrs, then push the front edge of the plug into hole from the outside of the enclosure. REMOVAL C Isolate the circuits and open the enclosure lid. From inside the enclosure, push the centre of the plug until the button pops out on the other side. B Push the button on the plug inwards until it is flush with the rest of the plug. D Hold the plug at the base and remove. Visit our Web Site at www. ehawke. com AI 284 - Issue D / Page 1 of 1 Safety First Hawke International UK Office, Oxford Street West, Ashton-under-Lyne, Lancashire. UK. Sales: UK 0870 60 60 105 Sales: +44 (0) 161 830 6698 Technical UK: 0870 458 9358 Technical: +44 (0) 161 830 6697 Fax: +44 (0) 161 830 6648 E-mail: sales@ehawke. com International [. . . ] [. . . ]