User manual HAWKE EXNR 474 EXNR II-EXTD IIC ASSEMBLY AI 357 ISSUE L 08-06
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HAWKE EXNR 474 EXNR II-EXTD IIC. We hope that this HAWKE EXNR 474 EXNR II-EXTD IIC user guide will be useful to you.
 |
Manual abstract: user guide HAWKE EXNR 474 EXNR II-EXTD IICASSEMBLY AI 357 ISSUE L 08-06
Detailed instructions for use are in the User's Guide.
[. . . ] Assembly Instructions for cable gland: ExnR 474 ExnR II/ExtD IIC
Operating temperature range -60°C +80°C
15mm minimum thread length
International
Assembly Instructions AI 357 / Issue L - 08/06 Certification Details
Gland Type: ExnR 474 ExnR II/ExtD IIC Baseefa No: 06ATEX0060X II 3 GD A21 IP66 IECEx No: BAS06. 0017X
1 2
Conduit or Cable Gland 1. [. . . ] A member of the Hubbell Group of Companies
Hawke International UK Office Oxford Street West, Ashton-Under-Lyne, Lancashire OL7 0NA. UK
www. ehawke. com
AI 357 - Issue L / Page 1 of 2 Sales (UK): 0870 606 0105 Sales: +44 (0) 161 830 6698 Technical (UK): 0870 458 9358 Technical: +44 (0) 161 830 6697 Fax: +44 (0) 161 830 6648 E-mail: sales@ehawke. com
5 5
4
2
1
1
C Pass the conductors through the entry which may have previously been fitted into the equipment. Locate seal in the counter bore of the entry by bringing the conduit/cable gland towards the equipment.
D Locate the running coupler onto the entry and hand tighten until resistance is felt against the seal. Then using a spanner/wrench tighten the running coupler onto the entry a minimum of one full turn, ensuring that entry is prevented from turning and the backnut remains tight on the conduit/cable gland.
CABLE GLAND SELECTION TABLE
Size Ref. A B C Male Entry Thread Size Metric M20 M25 M32 NPT # # # Female Entry Thread Size Metric M20 M25 M32 NPT ½" - ¾" ¾" - 1" 1" - 1¼" Max Length 69 61 77 Hexagon Dimensions Across Flats 30. 0 36. 0 46. 0 Across Corners 34. 6 41. 6 53. 1
# Thread sizes specified with order
CABLE GLAND SIZE FOR CONDUCTOR
Maximum No. of Cores 7 4 3 Cores Cross Sectional Area mm² 1. 5 A&B ----2. 5 A&B ----4. 0 B&C ----6. 0 C B --10. 0 C --B
PUNCH TOOL SIZE DETAILS
Punch Ref. mm² No. 1 1. 5 No. 1 2. 5 No. 2 4. 0 No. 2 6. 0 No. 3 10. 0
SPECIAL CONDITIONS FOR SAFE USE: 1. These cable gland types are only suitable for use with fixed apparatus, the cable for which must be effectively clamped and cleated elsewhere. [. . . ] Serrated washer, to dampen any vibrations that may loosen the locknut or cable gland assembly.
AI 357 - Issue L / Page 2 of 2 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAWKE EXNR 474 EXNR II-EXTD IIC
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HAWKE EXNR 474 EXNR II-EXTD IIC will begin.