User manual HITACHI POWER TOOLS P100F ELECTRIC TOOL PARTS LIST

[. . . ] 1. Read instructions — All operating instructions must be read and understood before the product is operated. 2.  eep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future K reference. 3. Observe warnings — All warnings on the product and in the instructions must be observed closely. 4. Follow instructions — All operating instructions must be followed. [. . . ] Removing covers can expose you to high voltage and other dangerous conditions. 1 R 4.  epair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. b. When a liquid was spilled on the product or when objects have fallen into the product. d. When the product does not operate properly as described in the operating instructions.  o not touch the controls other than those described in the operating instructions. Improper adjustment of controls D not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. Any noticeable abnormality in the product indicates that the product W needs servicing. 15.  eplacement parts — In case the product needs replacement parts, make sure that the service person uses replacement R parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 1 S 6.  afety checks — Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 1 W 7.  all mounting — When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. Ensure that no objects such as paper clips or pins enter the monitor as this could lead to fire or electric shock. -  o not place the monitor on top of unstable objects or in D unsafe places. Do not allow the monitor to receive strong shocks or to strongly vibrate. -  o not use the monitor near heating equipment or in places D where there is likelihood of high temperature, as this may lead to generation of excessive heat and outbreak of fire. -  o not use the monitor in places where it may be exposed to D direct sunlight. -  he AC outlet shall be installed near the equipment and shall T be easily accessible. The Power Cord - Use only the power cord supplied with the monitor. -  o not damage the power cord nor place heavy objects on D it, stretch it or over bend it. D Adding an extension cord may lead to fire as a result of overheating. -  o not attempt to repair the power cord if it is broken D or malfunctioning. Refer the servicing to the service representative. MOUNTING PRECAUTIONS • This product is for use indoors. • Consult your dealer before installing, removing or moving the monitor. [. . . ] • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure. 2 [5] 2 [5] 2 [5] • If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range. [. . . ]