User manual HP LASERJET PRO 200 COLOR M251N (CF146A)

[. . . ] LASERJET PRO 200 COLOR User Guide M251n M251nw HP LaserJet Pro 200 color M251 Series Printer User Guide Copyright and License © 2012 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] When the summary screen opens, you can touch it to adjust the settings. Retrieve the printed job from the output bin, and remove the USB drive. 4. 5. 54 Chapter 3 Print ENWW 4 Manage and maintain the product ● ● ● ● ● ● ● ● ● ● ● ● Use the HP Reconfiguration Utility to change the product connection Use HP Web Services applications Configure IP network settings HP Device Toolbox (Windows) HP Utility for Mac OS X HP Web Jetadmin Product security features Economy settings Print when a toner cartridge is at estimated end of life Store and recycle supplies Replacement instructions Update the firmware ENWW 55 Use the HP Reconfiguration Utility to change the product connection If you are already using the product and you wish to change the way it is connected, use the HP Reconfiguration Utility to set up the connection. For example, you can reconfigure the product to use a different wireless address, to connect to a wired or wireless network, or change from a network connection to a USB connection. After you select the type of connection you wish to make, the program goes directly to the portion of the product setup procedure that needs to change. The HP Reconfiguration Utility is located in the HP programs group on your computer. 56 Chapter 4 Manage and maintain the product ENWW Use HP Web Services applications Several innovative applications are available for this product that you can download directly from the Internet. For more information and to download these applications go to the HP ePrintCenter Web site at www. hpeprintcenter. com. To use this feature, the product must be connected to a computer or network that has an Internet connection. Follow this procedure to enable HP Web Services: Use HP Web Services applications (LCD control panel) NOTE: This section applies to the HP LaserJet Pro 200 color M251n Printer model only. Select the Enable Web Services menu, and then press the OK button. After you download an application from the HP ePrintCenter Web site, it is available in the Apps menu on the product control panel. Use HP Web Services applications (touchscreen control panel) NOTE: This section applies to the HP LaserJet Pro 200 color M251nw Printer model only. From the Home screen on the product control panel, touch the Web Services Touch the Enable Web Services button. button. After you download an application from the HP ePrintCenter Web site, it is available in the Apps menu on the product control panel. ENWW Use HP Web Services applications 57 Configure IP network settings View or change network settings Use the HP Device Toolbox to view or change IP configuration settings. It has this format: xxx. xxx. xxx. xxx ● If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. Open the HP Device Toolbox by clicking the Start button, clicking the Programs or All Programs group, clicking HP, clicking the product group, and then clicking HP Product Settings. You can change settings as needed. 3. Manually configure IPv4 TCP/IP parameters from the control panel Manually configure IPv4 TCP/IP parameters (LCD control panel) NOTE: This section applies to the HP LaserJet Pro 200 color M251n Printer model only. Use the arrow buttons to select the Network Setup option, and then press the OK button. Use the arrow buttons to select the TCP/IP configuration option, and then press the OK button. Use the arrow buttons to select the Manual option, and then press the OK button. Use the alphanumeric buttons to type the IP address, and then press the OK button. If the IP address is incorrect, use the arrow buttons to select the No option, and then press the OK button. Repeat step 5 with the correct IP address, and then repeat step 5 for the subnet mask and default gateway settings. Manually configure IPv4 TCP/IP parameters (touchscreen control panel) NOTE: This section applies to the HP LaserJet Pro 200 color M251nw Printer model only. Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway. From the Home screen on the product control panel, touch the Setup Scroll to and touch the Network Setup menu. [. . . ] Make sure that the cables are connected correctly and the product is on. Make sure that the product . GZ file is in the following hard-drive folder: Library/Printers/ PPDs/Contents/Resources. Replace the USB or network cable with a high-quality cable. ENWW Solve product software problems with Mac OS X 123 A print job was not sent to the product that you wanted 1. Another product with the same or similar name might have received your print job. [. . . ]