User manual HUMAX CI-8100PVR

[. . . ] Notice ** Copyright (Copyright © 2001 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** Warranty The information in this document is subject to change without notice. HUMAX does not have any responsibility for direct, indirect, accidental, necessary and other damage due to your offer or use of the information contained in this manual. ** Trademarks VIACCESSTM is a trademark of France Telecom. 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. This receiver manufactured under license from Dolby Laboratories. ** Thank you for purchasing a HUMAX personal video recorder. [. . . ] When you press this button, all the channel lists channel lists are sorted by channel number, is switched into . Or, if channel lists are sorted by channel name, to order channels by number. ** Unselect all the selected channels Press button to unselect all the selected channel. 7. 5 Channel Change Mode You can change the channel either in the group or in the entire groups while watching a programme. Select All Channels or Within the Current Channel List using button, and press the OK button. the Note: When Within the current channel list is selected, you can only change the channel within the current channel list using the CH-/CH+ buttons. To change the channel in another channel list in which the current channel list is not located, change the channel list group or select All channels option. GB 40 8. Programme Guide ** The Programme Guide displays programme information about each channel, based on the date and time. You can also schedule your watching using the information given. 8. 1 Viewing Programme Guide Information You can view programme information for all channels. Move to other desired channel using multiple channels, use PAGE-/PAGE+ button to move to channels by page. Also, you can enter your desired channel number using the NUMERICAL (0~9) buttons at remote controller to move to the channel directly. Then you can watch the programme if it is on air, or you can reserve it if it is the future programme. Press the i button in the selected programme to view detailed information for the selected channel. 1. Viewing Guide Information by Groups You can view programme information for desired channel list by groups. Select your desired channel list group using the button to display the appropriate sub-group. Move the cursor to the sub-group using the button, select your desired sub-group using the button, and then press the OK button. The Programme Guide for selected channel list is displayed. GB 41 8. Viewing Programme Information Using Time Bar You can quickly search for your desired time zone using the Time bar. Select the each button using the button, and press the OK button to move as your desired amount of time. If you press the button repeatedly, the same operation is repeated. 4. and press the OK button to exit the Time Bar. Note: Guide provides programme information from the previous day to the next 7 days. 3. Reserving a Recording You can automatically reserve your desired programme by selecting the scheduled programme and pressing the OK button. Select the desired programme and press the OK following message will be displayed. When reservation has been completed, the is displayed on the reserved programme. If the channel is locked, parental controlled or restricted by watching time, you will be prompted to enter your Password. [. . . ] Reservation is unavailable - Check whether it it not overlapped with other reservation. Watching scrambled channel is not available -Check the correct Smart Card is plugged in. - Check the correct smart card is plugged in, and correctly plug the smart card again. Trouble Shooting ** 15. 2 Error Message Error message No or bad signal Possible causes The satellite dish is not pointing at the satellite. [. . . ]