User manual HUMAX DT 9500 CI

[. . . ] Please read this user manual carefully, to be able to safely install, use and maintain the product at maximum performance. Throughout the whole manual, Note indicates additional product operation information to make the user aware of possible problems and information of any importance to help the user understand, use and maintain the installation. ** Manufactured under license from Dolby Laboratories. ** Dolby and the double-D symbol are trademarks of Dolby Laboratories. ** All other trademarks are the properties of their respective owners. ** Copyright © 2006 HUMAX Corporation ** Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** The information in this document is subject to change without notice. GB 1 Safety Warning ** The product has been manufactured to satisfy international safety standards. Please read the following safety precautions and warnings carefully. ** · · · · · · · · · · · Disconnect the product from the mains before you start any maintenance or installation procedures. Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock. [. . . ] When you complete the setting, press the OK button to start channel search. ** Note: Channels found during Advanced Installation menu shall be stored to the OTHER mode To switch between DIGITURK and OTHER channels press the MODE button on remote control. GB 28 5. 3 Organise Channels 1. Organise All Channels You can edit TV or radio channels using Organise TV/Radio Channels (MENU-Installation-Organise Channels-Organise TV/Radio Channels-Organise All Channels). Before leaving Organise TV/Radio Channels screen, you will be prompted to save the changes. If you would like to save the changes, select OK and press the OK button. ** You can delete, move, lock or unlock, skip and rename channels. You can select a channel and press the COLOUR button to execute the corresponding operation as described on the screen. When you rename a channel, the keyboard will appear on the screen. Select a character using the button and press the OK button to enter the selected character. Note: · You must enter the PIN code using the NUMERIC buttons to view the locked channels. · You are not allowed to organize DIGITURK channels, except of lock feature. GB 29 5. Organise Favourite A~B You can add channels to Favourite groups using Organise Favourite TV/Radio Channels (MENU-Installation-Organise Channels-Organise TV/Radio Channels-Organise Favourite A~B). Before leaving Organise Favourite TV/Radio Channels screen, you will be prompted to save the changes. If you would like to save the changes, select OK and press the OK button. The Organise Favourite TV/Radio Channels screen consists of Favourite Group and Favourite List on the left side of the screen and Channel List on the right side. You can move the highlighter in order of Favourite Group, Favourite List and Channel List using the button. To add channels to Favourite List, select a channel in Channel List using the button, and press the OK button. For more information about how to edit the channels in Favourite List, refer to 5. 3. 1 Organise All Channels. GB 30 3. To enter Organise Satellites menu, go to MENU-Installation-Organise Channels-Organise Satellites. The Organise Satellites screen consists of Satellite List on the left side of the screen and Transponder List and Channel List on the right side. You can move the highlighter in order of Satellite List, Transponder List and Channel List using the button. You can select a satellite in Satellite List or transponder in Transponder List using the button. Press the RED button to delete the selected satellite or transponder. GB 31 5. Installation 5. 4 Factory Settings You can restore the product to the factory settings using the Factory Settings menu (MENU-Installation-Factory Settings). Warning: Please note that once you perform the factory setting, all data except the customised PIN code will be restored to the factory settings. GB 32 6. [. . . ] If the weather is not favorable, and the signal strength and quality are not recommendable, perform the software update later. ** Caution: · Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software update, fatal damage may be caused to the product. · Please be careful not to pull out the signal line (LNB cable) during software update. Update may be interrupted and the product may not operate. ** Note · Other functions will not activate while software update takes place. [. . . ]