User manual HUMAX DV-1000T

[. . . ] ** ** ** ** ** Notice ** Copyright (Copyright © 2001 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** Warranty The information in this document is subject to change without notice. HUMAX does not have any responsibility for direct, indirect, accidental, necessary and other corruptions due to your offer or use of the information contained in this manual. ** Trademarks 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Out are trademarks of Digital Theatre Systems Inc. Manufactured under license from Dolby Laboratories. ** This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ] Uses the fixed Subtitle Font. 7. 3 Time Setting You can specify the current time and Power On/Off time. OK ** 1. Setting Current Time You can set the GMT Offset for current time. GMT is changed by from 30 minutes to 1 buttons, and press the OK button. ** 3. Select your GMT offset using the Note: · The current time is set automatically whenever GMT Offset changes. If GMT Offset is Auto, it is automatically set depending on your country. ** ** ** GB 48 ** ** ** ** ** ** ** ** ** ** ** ** 2. Power On You can set the time when the product is automatically powered on. OK ** Enable Disable Uses the Power On and sets the Power on time. 3When you have selected Enable, enter the Channel No and Time using the NUMERICAL(0~9) buttons, and select OK and press the OK button. 3. Power Off You can set the time when the product is automatically powered off. Select either Enable or Disable the Power Off using the button. ** button, and press the OK ** Enable Disable Uses the Power Off and sets the Power Off time. When you have selected Enable enter the Time using the NUMERICAL(0~9) buttons, and select OK or button. Note: Once Power On/Off is specified, it is repeated everyday. 7. 4 Schedule You can reserve a programme to watch programme at your desired time. To desired reservation, and press the OK add a new reservation, select a blank list and press button. the OK Note: For detailed information about Schedule, refer to Chapter 6. 3. ** ** ** GB 49 ** ** ** ** ** ** ** ** ** ** 7. Setting Preferences ** 7. 5 A/V Control You can set Audio or Video Output Control. Select one option among button button, and press the OK CVBS/S-Video using the or button. button, and press the OK 2. or button. 4:3 or 16:9 using the OK ** ** ** GB 50 ** ** ** ** ** ** ** ** ** ** ** ** 5. Display Format You can select the Display Format according to TV Screen Ratio. If the Screen Ratio is set to 4:3, you can select one from 16:9 Letterbox/14:9 button, and press the OK button. If the screen ratio is set to 16:9, this item will display Disable or Auto. 6. Dynamic Range This function adjusts audio output of SCART, RCA, and RF cable with DOLBY DIGITAL. When listening at a low volume, Dynamic Range reduces the volume of loud sounds such as explosions, etc, and increases the volume of quiet sounds such as whispered dialog. [. . . ] Distored sound from Hi-Fi amplifier - Check to make sure that no audio connections are made to the amplifier phono input. No color in picture - The disc format is not according to the TV-set used. (PAL/NTSC) Error Message (STB only) Error message Possible causes The aerial is not pointing properly. What to do Adjust aerial. Check the cable from the aerial. If you cannot resolve the problem you may need to have your aerial and installation tested by a professional. ** No or bad signal ** The channel is scrambled or not available. The channel has signal, but no audio or video. The channel is for data broadcasting. Confirm if the channel is currently on air. Cannot watch the channel in usual way. The channel is scrambled. [. . . ]