User manual HUMAX DVR-9900C

[. . . ] Digital Video-Recorder DVR-9900C User's Manual Notice Copyright (Copyright © 2006 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** Warranty The warranty does not cover parts which may become defective due to misuse of the information contained in this manual. ** Trademarks Nagravision is a registered trademark of KUDELSKI S. A. 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. ** "This product incorporates copyright protection technology that is protected by U. S. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. " ** Thank you for purchasing a HUMAX product. [. . . ] Enter the programme name directly using the keyboard displayed on the screen. Note: button and then press the OK · Select the button to enter the programme name on the keyboard screen. · If you select Previous or Next on the keyboard displayed on the screen and press the OK button, the keyboard layout is switched. ** ** 5. Select a programme and press the Rec or OK button to record or reserve the programme. If you want to find another programmes, press the Zurück or BLUE button to display the keyboard screen. ** Note: Found Programme List may differ depending on the provided programme information. GB 41 8. Service Menu In this chapter you can easily access the service features. Note: · Press the Zurück · Press the Menü or button to save the changes and return to the previous menu. button to exit the menu screen. or KDG 8. 1 PIN-Code Change You can change the current PIN-Code. Note: ** When changing the PIN-Code, do not repeat the same figures. 2. In case of entering four identical figures If you enter four identical figures as your new PIN-Code, an error message will appear. You will be prompted to enter another four-digit number as your new PIN-Code. ** 3. In case of entering a wrong PIN-Code If you enter the wrong PIN-Code when entering the current PIN-Code, an error message will appear. Access will be denied for 10 minutes if you enter the wrong PIN-Code three times. GB 42 8. Note: The displayed information may differ depending on the type of Smartcard. 8. 3 System You can view system information. To perform software update, select Software Update and press the OK button. To initialize all settings, select Reinitialize and press the OK button. ** GB 43 8. Press the OK button and enter the values for Start Frequency, End Frequency, Step, Constellation and Append Symbol Rate. Press the OK For more information, refer to 12. 1 Automatic Search. ** GB 44 8. Service Menu 8. 5 Picture You can make settings for picture format, display format, SCART signal and A/V control. Display Format You can set the display format according to the picture format of your TV. Select Display Format using the button and press the OK or button. 2. When choosing 4:3 as picture format, select an option among Auto, Letter Box and Center Mode using the button and press the OK or button. [. . . ] To play back the recorded file of a scrambled channel, use the Smartcard. In case it has been a long time since you last recorded, this may not work. The signal during the recording may be weak or the hard disk too full. Certain channels may not be changed due to restriction of the tuner type. 8. [. . . ]