User manual HUMAX HD-FOX

[. . . ] HD Digital Receiver HDTV Digital-Receiver The default password is 0000. Das voreingestellte Passwort lautet 0000. User's Manual Bedienungsanleitung HD-FOX Notice Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. [. . . ] Note: You can select RGB only when the Component Select switch at the rear is on RGB. 2. Dolby Digital Auto Selection You can set Dolby Digital automatically. Note: Lip-Sync is applied to all channels when once adjusted. GB47 User's Manual 7. Display Format You can select the display format according to the screen ratio. When choosing 4:3 as screen ratio, select among Auto, Letter Box, Pan & Scan and press the OK button. When choosing 16:9 as screen ration, select among Auto, Pillar Box, Zoom and press the OK button. Screen Ratio Display Format 4:3 Letter Box, Pan & Scan, Auto 16:9 Pillar Box, Zoom, Auto 8. Letter and Pillar Box Colour You can select the colour of the Letter Box and Pillar Box. Select Black or Gray using the OK or / button. 7. 5 Other Settings You can configure other settings such as info display time, OSD transparency and Power saving in standby. Select Other Settings using the / button and press the OK button. GB48 User's Manual 7. Info Display Time You can set the automatic display time of the information box when the channel is switched. Select a value between Disable, 1~ 20 seconds and press the OK button. Note: When set to Disable, the i-plate will not be displayed when you switch the channel. 2. OSD Transparency You can set the transparency of the On-Screen Display. Disable 25, 50, 75 Fully opaque screen The bigger the number, the more transparent the screen. 3. Power Saving in Standby You can select whether the product switches to power saving mode in standby. Select from On and Off using the OK or / button. GB49 User's Manual 8. Edit Channels In this chapter you can edit all channels in the channel list or make changes to the favourite lists of the channels you have chosen. Note: · Press the EXIT button to save the changes and return to the previous menu. · Press the TV/RADIO button to move to TV or radio channel list directly. 8. 1 Edit Channel List Edit Channel List enables you to delete, move, select, rename or lock/unlock the channels in the channel list conveniently. Select Edit Channel List using the / button and press the OK button. 1. Press the RED button to delete the chosen channels. GB50 User's Manual 8. [. . . ] A LNB converts signals received from satellite to a lower frequency and sends them to a satellite receiver via coaxial cable. OSD (On Screen Display) OSD displays the basic information necessary for the users to configure monitor or TV settings. OSD information may include brightness, contrast, tuning, RGB adjustment, and screen size and position. OTA (Over the Air) A standard for the transmission of software for equipment, through a broadcast system. [. . . ]