User manual HUMAX HDCI-2000T

[. . . ] Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without notice. ** Copyright (Copyright © 2006 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** Warranty This warranty does not cover parts which may become defective due to misuse of the information contained in this manual. The information in this document is subject to change without notice. ** Trademarks ViaccessTM is a trademark of France Telecom. [. . . ] and press the OK ** Note: Press the i button to view detailed programme information. 1. Enter the channel number, start/end time, date, repeat frequency and button. (Refer to 6. 1. 2 Reserving Programmes in EPG Main. ) programme name and press the OK ** Note: · Reservations for deleted channels or past programmes are automatically deleted. · In case the channel number has changed, reservation has to be done again. 6. 4 Find Programme Find Programme enables you to find the programme you want by entering the genre, name, time and the day of the programme. Select Save and press the OK ** Note: You can select up to three types of genres. GB 33 6. Select Save and press the OK ** Note: You have to enter more than three letters. Select Save and press the OK button and press the OK button to complete. 4. Select Save and press the OK button and press button to complete. GB 34 5. After setting more than one required value, select Start and press the OK button to proceed. System In this chapter you can easily access the service features of the product. Options such as CI-Module, system status, Dolby Digital and startup channel are included in System. ** Note: Press the BACK button to save the changes and return to button to exit the the previous menu. Press the MENU menu screen. 7. 1 CI-Module CI-Module shows you the current status of the Common Interface module. Note: The displayed information about each Common Interface may differ depending on the type of Common Interface. 7. 2 System Status System Status allows you to view the system information of the product. Note: The information displayed may differ. GB 36 7. 3 Dolby Digital 1. Select On/Off using the OK or button and press the BACK button to set the value. 7. 4 Startup Channel You can assign a certain channel to be displayed when the product is turned on. Setting the Startup Channel You can choose to assign a certain channel to be displayed when powering on. Select On/Off using the OK On Off or button. The assigned channel will be displayed when powering on. The last channel you have watched will be displayed when powering on. GB 37 7. Startup Channel You can assign a preferred channel as the start channel. When you have selected User preference, enter the channel number using the NUMERIC(0-9) buttons and press the OK button. ** Note: When Off is selected, Start Channel Number is inactivated. You can switch to TV/radio by pressing the TV/RADIO button on the remote control. GB 38 8. Setting In this chapter you can set parental control, subtitle setting, time setting, A/V setting and other configuration items to keep limitations where you want them for the viewers. ** Note: Press the BACK button to save the changes and return to the previous menu. [. . . ] Check in the menu that the product is detecting the Smartcard or CI-Module. Check in the menu that you have a valid and working subscription to the channels you wish to view. Ensure that the Smartcard or CI-Module is not damaged. ** 11. Cannot watch pay channels. Check in the menu that you have a valid and working subscription to the channels you wish to view. [. . . ]