User manual HUMAX IR-ACE M

[. . . ] Contents Safety Copyright & Glossary Reference STB Connections Remote Control Unit Function Guide Main Menu Guide Motorised System Troubleshooting Guide Menu Map Specification GB2 GB3 GB4 ~ GB5 GB6 ~ GB11 GB12 ~ GB13 GB14 ~ GB18 GB19 ~ GB47 GB48 ~ GB52 GB53 GB54 ~ GB55 GB56 ~ GB57 GB1 Safety This STB has been manufactured to satisfy international safety standards. MAINS SUPPLY OVERLOADING LIQUIDS CLEANING VENTILATION : 90 - 250 V AC 50/60 Hz : Do not overload a wall outlet, extension cord or adapter as this may result in fire or electric shock. : The STB should not be exposed to dripping or splashing, and no objects containing liquids, such as base, should be placed on the apparatus. : The slots on top of the STB must be left uncovered to allow proper airflow to the unit. [. . . ] If the Screen Mode is selected as 4:3, there are two modes, Centre and Letter-box in the display format. If the video is formatted as 16:9 and the display format selected as Centre mode, the right and left portions of the video are cut off to fit the 16:9 video into the 4:3 TV screen. If the video is formatted as 16:9 and the display format selected as Letter-box mode, the video is vertically shrunk to fully display on the 4:3 TV screen. If the video is formatted as 4:3, the display format is not applicable when the screen mode is selected as 4:3. If the Screen Mode is selected as 16:9, there are two modes, Full and Pillar-box, in the display format. If the video is formatted as 4:3 and the display format selected as Full mode, the video is expanded to fit the 4:3 video into the 16:9 TV screen. If the video is formatted as 4:3 and the display format selected as Pillar-box mode, the video is displayed on the centre of the 16:9 TV screen without modification. If the video formatted as 16:9, the display format is not applicable when the screen mode is selected as 16:9. GB29 Main Menu Guide NTSC Mode To configure the NTSC mode on the TV, proceed as follows: 1. UHF Tuning The UHF Tuning menu supplies the following functions: · Set the UHF channel (CH28 ~ CH69). Other Setting The Other Setting menu supplies the following functions: · Set the level of OSD transparency. · Set the Menu Mode, which changes the menu format according to the video format (NTSC, PAL, Auto). If the menu mode is set at Auto, the menu format is automatically changed according to the format of the decoded video. GB30 OSD Transparency To set the OSD transparency, proceed as follows: 1. Select the desired level between Opaque and Transparent modes using the button. Press the OK ( ) or EXIT ( ) button to confirm. 3-2 Service Organising The Service Organising menu supplies several organising methods: · · · · Organisation of TV services, Organisation of Radio services, Organisation of services sorted by a network name, Deletion of services belonging to a satellite. GB31 Main Menu Guide Organise TV Services The Organise TV services menu supplies two organisation methods: Organise All Services and Organise Favourites. Organise All Services The services are sorted according to the service number in the Organise All Services menu. Each service can be deleted from the TV service list, moved to another position, locked or skipped when zapping the service. Activate the Organise All Services menu for TV services via the Main menu. If a service is to be left unmarked, select it and press the RED button again (i. e. Press the OK ( ) button to delete all the marked services, otherwise press the EXIT ( ) button to cancel. To move a service to another position in the service list, proceed as follows: 1. Press the OK ( ) or GREEN button to confirm, otherwise press the EXIT ( ) button to cancel. GB32 To lock a service in the service list, proceed as follows: 1. Press the OK ( ) button to confirm or the EXIT ( ) button to cancel. GB33 Main Menu Guide Organise Favourite Services The services are sorted according to favourite groups in the Organise Favourites menu. [. . . ] When you have selected the satellite you wish to view, go down to the Motor Control option and, using the buttons again, select "Go to" and press the OK ( ) button. When using the Movement option for fine-tuning, you must remember to store the changes you have made, otherwise they will be lost. 7. Searching for services on your selected Satellite Once you have moved the motor into position, you can search for the channels transmitted from the relevant satellite. To search for services on your new selected satellite, proceed as follows: 1. [. . . ]