User manual HUMAX L3040

[. . . ] 3601 West Garry Ave Santa Ana, CA 92704 www. humaxusa. com A L 2 Important Safety Instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. It is dangerous to make any kind of contact with any inside part of this device. This symbol alerts you that important literature concerning operation and maintenance has been included with this device. WARNING : DO NOT EXPOSE THIS DEVICE TO DRIPPING OR SPLASHING, OR PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THIS DEVICE. FCC NOTICE A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used according to the instructions, may cause harmful interference to radio communications. [. . . ] When you press the buttons you have set to PUNCH mode, the product name will show along with the PUNCH icon in the product indication window. To stop the PUNCH setup process, press the CANCEL button. PUNCH PUNCH PUNCH PUNCH 22 Reset How to Reset the Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). PUNCH The MBR icon will appear and blink. The remote control will return to its initial state. 23 Basic operation Turning the LCD TV On and Off 1 2 3 Connect the Power Cord to the AC input on the back of your LCD TV. The LED lamp will change to light off and your LCD TV will be turned on. Indicator Lights Status Standby Mode Power On Power Saving Lamp Blue Light off Flickering ) button 4 Viewing the OSD Menu 1 With the power on, press the MENU ( ) button on the remote control. ) button to select the sub-menu. 2 3 Use the SEL ( The OSD(On-Screen Display) disappears automatically after a few seconds without pressing other buttons or you can also press the MENU button to return to the previous menu or press the MENU button once or more to exit the OSD. 24 Basic operation Displaying Status Information 1 With the OSD, press the INFO button on the remote control. The LCD TV will display the external source, Picture Mode, Aspect Ratio, Clock and Video type. Selecting your Language When the LCD TV is initially powered ON, you must select the language in which to display all on-screen menus. 1 2 3 Press the MENU button. or Press the press the SEL ( button to select the OSD ( ) icon; then ) or button to select the Language. Select the appropriate language by pressing the button repeatedly. You can choose one of 9 languages. or After adjustment: Press the MENU button to exit. 25 Channel Setting up Channels Automatically Your LCD TV can memorize and store all of the available channels for both "TV(antenna) and cable channels. Therefore you must specify the type of signal source that is connected to the LCD TV. 1 2 3 4 Press the MENU button. Channel Channel Mode Auto Program LNA TV Pro Off Added 0 Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button to select Channel Mode. Channel Memory Fine Tune Move Select Exit Press the or button to select the option ( TV or CATV ). Channel Channel Mode Auto Program TV Pro Off Added 0 Press the or button to select Auto Program; then press the SEL ( ) or button. To stop the search before it has finished, press MENU button. LNA Channel Memory Fine Tune Move Select Exit Channel Channel Mode Auto Program TV Pro Off Added 0 After adjustment: Press the MENU button to exit. LNA Channel Memory Fine Tune Quick Way Press the AUTO button on the remote control. Move Select Exit Adding and Erasing Channels 1 2 Select channel that you wish to add or erase by directly pressing the numeric buttons on the remote control. Repeatedly pressing this button will alternate between Added and Erased. Erased Channel : display in Yellow. TV 10 Added TV 10 Erased 26 Channel Using the LNA(Low Noise Amplifier) If the LCD TV is operating in a weak-signal area, sometimes the LNA function can improve the reception. 1 2 3 4 Press the MENU button. Channel Channel Mode Auto Program TV Pro Off Added 0 Press the button to select the Channel ( or then press the SEL ( ) or button. ) icon; LNA Channel Memory Fine Tune Press the or button to select to the LNA. Move Select Exit Channel Channel Mode Auto Program TV Pro Off Added 0 Press the or button to select On or Off. LNA Channel Memory Fine Tune Move Select Exit Channel Channel Mode Auto Program LNA Channel Memory Fine Tune TV Pro On Added 0 After adjustment: Press the MENU button to exit. Move Select Exit Fine Tuning Channels If the reception signal is weak or distorted, you can adjust channel to manually using the fine tuning. 1 2 3 4 Press the MENU button. Channel Channel Mode Auto Program TV Pro Off Added 0 Press the or button to select the Channel ( then press the SEL ( ) or button. ) icon; LNA Channel Memory Fine Tune Press the or button to select the Fine Tune. Channel Move Select Exit Press the or button to adjust the Fine Tuning. Channel Mode Auto Program LNA Channel Memory Fine Tune TV Pro Off Added 16 Move Select Exit After adjustment: Press the MENU button to exit. 27 Direct Access Features Selecting Channels Using the Channel Buttons 1 Press the CH or CH button to selecting channels. When you press the or button, the LCD TV changes channels in sequence. But you will not see channels that were either erased or not memorized. Using the Direct Access Buttons 1 Press the numeric buttons to select directly to a channel. Two digit channel selection: For example, to select channel 36, press 3 then 6. Three digit channel selection: For channel 115, press 1, then 1, then 5 or press 100 button and then 1, then 5. After adjustment: Press the MENU button to exit. Using the FAV button to select the previous channel 1 Press the FAV button on the remote control. The LCD TV will switch to the last viewed channel. Adjusting the Volume 1 Press the VOL+ or VOL- button to increase or decrease the Volume on the remote control. 50 Switching the Sound Off Temporarily You can temporarily cut off the sound using the Mute button. 1 2 Press the MUTE button on the remote control. When you wish to turn the sound back on, press the MUTE button again. Mute 28 Direct Access Features Selecting a Device from External Sources You can select the favorite signal from connected external sources such as DVD, VCR, STB, and TV(Antenna or Cable). 1 2 Press the SOURCE button on the remote control. Press the the SEL ( or button to select signal source, then press ) button. Source TV Video S-Video Component1 Component2 RGB DVI Move TV Connected Not Connected Connected Connected Not Connected Not Connected Exit Select 29 Picture Changing the Picture standard 1 2 3 Press the MENU button. Press the or button to select the PICTURE ( then press the SEL ( ) or button. ) icon; or button to select Standard, Dynamic, Mild, Press the or Custom picture setting. NOTE : You can select a mode from among Middle, High, Low, or Custom modes in RGB/DVI input Sources. Quick Way Press the PICTURE button on the remote control. While pressing the button continuously, you can select the picture mode in the following sequence: Standard Dynamic Mild Custom In RGB/DVI mode, you can select : Middle High Low Custom Customizing the Picture 4 or button to With Picture menu selected, press the select an option (Contrast, Brightness, Sharpness, Color, or Tint-NTSC only) that you wish to change : then press the button. SEL ( ) or If you adjust the Contrast, Brightness, Sharpness, Color, or Tint (NTSC only) settings on the Picture menu, the picture standard is automatically switched to custom. 5 Press the or button to change the value of the item. NOTE : In the PC/DVI mode, the Sharpness, Color, or Tint feature does not work. After adjustment: Press the MENU button to exit. 30 Picture Changing the Sound Standard 1 2 3 Press the MENU button. Press the or button to select the SOUND ( then press the SEL ( ) or button. ) icon; or button to select Drama, Movie, Music, Press the News, or Custom sound setting. Quick Way Press the SOUND button on the remote control. While pressing the button continuously, you can select the sound mode in the following sequence: Drama Movie Music News Custom In RGB/DVI mode, you can select : Middle High Low Custom Customizing the Sound 4 5 6 or button to select With Sound menu selected, press the an Equalizer; then press the SEL ( ) or button. button to reach the required setting; button. Sound Mode Equalizer Balance BBE Mode Surround Sound Mode AVL Move Adjust Custom Pro. 50 L Low On Mono Off Exit R 50 Sound Select a frequency(100Hz, 300Hz, 1KHz, 3KHz, or 10KHz) to be adjusted by pressing or button. [. . . ] It will provide you an additional convenience when you use the LCD TV connected with a PC. Separately sold RS-232C cable is required. ) First, connect the RS-232C cable between the PC and the LCD TV RS-232C input port. Refer to the following method for using this function. Installing Hyper terminal From the Windows original disks. On most Windows 95/98/2000 machines, Hyperterminal should be installed without explicitly requesting it. [. . . ]