User manual HUMAX LDE-32DST

[. . . ] English-1 Notice Notice Read this manual carefully and make sure you understand the instructions provided. For your safety, check what the result of each action will be. To reduce the risk of electric shock, do not remove cover (or back). Indicates a situation which, if not avoided, could damage the equipment or other apparatus. This symbol indicates dangerous voltage inside the TV that presents a risk of electric shock or personal injury. [. . . ] The selected channel is moved to its new location and all other channels are shifted accordingly. English-36 Chapter 6 >> Setting the Picture Selecting a Picture Mode > Picture Mode Brightness Contrast Sharpness Colour Hue Fleshtone Colour Temp. NR Back light Move Select 1 Press the MENU button. Bright 60 75 50 60 0 O ff Cool O ff H igh 2 Select Picture 3 The following options are available: Bright > Soft > Manual > Standard OK Note: You can select a picture mode by simply pressing the PIC MODE button on the remote control. Press again to switch. 4 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. Customizing the Picture Settings You can adjust the picture appearance to suit your preference and viewing situations. > Picture Mode Brightness Contrast Sharpness Colour Hue Fleshtone Colour Temp. NR Back light Move Adjust 1 Press the MENU button. Manual 60 75 50 60 0 O ff Cool O ff H igh Reset 2 Select Picture 3 Select the picture mode to Manual 4 The following options are available: Brightness > Contrast > Sharpness > Colour OK 5 button to reset to the default value. To select other options, repeat the steps from 4 to 5. BLUE 6 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. Note: You can adjust the Hue when watching the NTSC signal in AV1, AV2, AV3 or S-Video input mode. English-37 Chapter 6 >> Setting the Picture Fleshtone Use Fleshtone function to improve the picture quality by adjusting colour balance. > Picture Mode Brightness Contrast Sharpness Colour Hue Fleshtone Colour Temp. NR Back light Move Select 1 Press the MENU button. Bright 60 75 50 60 0 O ff Cool O ff H igh 2 Select Picture 3 Select Fleshtone 4 The following options are available. Off > Low > Medium > High OK 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. Colour Temperature Set to Warm less intense colours with more blue. > Picture Mode Brightness Contrast Sharpness Colour Hue Fleshtone Colour Temp. NR Back light Move Select Cool for displaying 1 Press the MENU button. Bright 60 75 50 60 0 O ff Cool O ff H igh 2 Select Picture 3 Select Colour Temp. 4 The following options are available: Cool > Normal > Warm OK 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. English-38 Chapter 6 >> Setting the Picture Noise Reduction (32 inch only) If the signal received by your television is weak, you can activate this feature to help reduce noise that may appear on the screen. > Picture Mode Brightness Contrast Sharpness Colour Hue Fleshtone Colour Temp. NR Back light Move Select 1 Press the MENU button. Bright 60 75 50 60 0 O ff Cool O ff H igh 2 Select Picture 3 Select NR 4 The following options are available. Off > Low > Medium > High OK 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. Adjusting Backlight Brightness You can adjust the brightness of Liquid Crystal Display (LCD). > Picture Mode Brightness Contrast Sharpness Colour Hue Fleshtone Colour Temp. NR Back light Move Select 1 Press the MENU button. Bright 60 75 50 60 0 O ff Cool O ff H igh 2 Select Picture 3 Select Backlight 4 The following options are available: High > Auto > Low > Medium OK 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. English-39 Chapter 7 >> Setting the Sound Setting the Sound Effect You can select the type of special sound effect when watching a broadcast. Sound Effect lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the programme content. > Sound Effec t Balance AVL SRS TruSurround XT Flat 0 O ff O ff 1 Press the MENU button. 2 Select Sound 3 Select Effect 4 The following options are available: User Customise your own sound effect. OK OK button. Move Enter >> Sound Effect Effec t Flat Adjuat Move 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. Note: You can select sound effect by simply pressing the SND EFFECT button on the remote control. Press again to switch. Adjusting the Sound Balance You can adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position. > Sound Effec t Balance AVL SRS TruSurround XT Flat 0 O ff O ff 1 Press the MENU button. 2 Select Sound 3 Select Balance 4 OK Move Adjust 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. English-40 Chapter 7 >> Setting the Sound Adjusting the Volume Automatically Each broadcasting station has its own signal conditions, volume may not be adjusted each time you switch channels. This feature lets you automatically adjust the volume of the selected channel by adjusting the sound output depending on the signal modulation. > Sound Effec t Balance AVL SRS TruSurround XT Flat 0 O ff O ff 1 Press the MENU button. 2 Select Sound 3 Select AVL(Auto Volume Level) 4 Select On/Off 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. OK Move Select Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5. 1multi-channel content over two speakers. [. . . ] Note: If the antenna is covered with snow or the RF is weakened by heavy rain, the condition of the sound and picture may temporarily be poor. However, the poor sound and picture quality due to weather conditions cannot be accepted as a malfunction of product. Change the satellite dish for a larger one as this will increase the signal levels received. Replace the LNB with a lower noise factor in cases where the noise factor is too high. [. . . ]