User manual HUMAX LGB-17DTT

[. . . ] LGB-17DTT LCD Digital and Analogue TV LCD Digital and Analogue TV Caution To reduce the risk of electric shock, do not remove cover(or back). Indicates a situation which, if not avoided, could damage the equipment or other apparatus. This symbol indicates dangerous voltage inside the LCD-TV that presents a risk of electric shock or personal injury. Indicates a hazardous situation which, if not avoided, could result in serious injury. [. . . ] You can view the programme information by pressing the INFO ( ) button while watching a programme. General Information The General Information is displayed at the bottom of the screen as followings. 1. Detailed programme information : displayed if detailed programme information is provided. 30. Next programme Information : displayed if next programme information is provided. Note : If there is no available programme information, programme information is not displayed. 2. Detailed Programme Information You can see detailed information about the current programme. Press the INFO ( ) button. Note : _ Press the INFO ( ) button again to hide the information box. / _ If the detailed programme information is more than one page, use button to move to the previous or next page. 2. 5 MHEG Application The MHEG application makes possible not only access to the Internet and exchange e-mail through TV but also put the receiver directly into conventional television state. 1. Select your desired application using the button, and press the OK ( button. Note : Please refer to the detailed information of each MHEG application if you operate the MHEG application. 31. DTV - Channel List 3. 1 Displaying and Switching Channel List You can display channel list using LIST ( on the channel list. 1. Press the LIST ( ) button while watching a channel to display the channel list. Select your desired channel using the / button and press the OK ( button to change the channel. Enter the channel number directly using NUMERICAL (0~9) button to move cursor onto your desired channel. Note: _ Within the channel list, press the PAGE ( / ) buttons to move on page-by-page basis. _ Whenever you press the DTV CH ( ) or RADIO CH ( ) button while the channel list is displayed, the channel list will be switched between the TV and Radio channel list. 3. 2 Editing Channels You can edit all channels or each channel by channel list group. 1. Select Edit Channels using the button, and press the OK ( button. 3. Select Edit Channel Lists using the / button, and press the OK ( ) or button. Note : _ Press the BACK ( ) or button to save the changes and return to the previous menu, press the EXIT ( ) button to exit the menu screen. _ You can easily navigate all menus using the assigned number for each menu. Press the MENU ( ) button then select Setup Digital Channel and then the numbers 2, 1 to select Edit Channel Lists menu. 32. Select a Channel Group You can select the channel list group to edit TV or Radio. 1. Select your desired channel list group using the / button, and press the OK ( ) button. Note : _ Press the DTV CH ( ) or RADIO CH ( ) button to move to TV or RADIO channel list directly. [. . . ] + You cannot watch the channel in the usual way. The channel is scrambled. + This digital terrestrial receiver does not support the service that enables descrambling of the scrambled channels. + Please contact your local dealer for an appropriate CI Module and viewing card. The audio is not available. + The channel has signal, but no Audio. + Press the DTV / AUDIO button to confirm if the channel has Audio. 55. Trouble Shooting Trouble Shooting Error Message Problem No picture on screen and No sound from speakers. Check item + Insert the AC power cord plug securely in AC power outlet. (The POWER/Standby indicator is Orange colour. ) + Turn on the MAIN POWER button on the bottom of the display. [. . . ]