User manual HUMAX LGB-19DTT

[. . . ] This symbol indicates important instructions accompanying the LCD-TV. Read this manual carefully and make sure you understand the instructions provided. Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. Indicates additional information to the user to make the user aware of possible problems and information of any importance to help the user to understand, to use and to maintain the installation. The information in this document is subject to change without notice. Copyright (Copyright 2004 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. Warranty HUMAX does not have any responsibility for direct, indirect, accidental and other damage caused by the use of the information contained in this manual. Trademarks VIACCESSTM is a trademark of France Telecom. 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. [. . . ] Enter your desired channel number using the NUMERICAL (0~9) button to move to the channel directly. ) button to switch between TV Note : You can switch channel using the channel list or programme guide. 2. 2 Changing the Subtitle Language If the current programme provides Subtitle information, you can select the language for the Subtitle. 1. Select your desired subtitle language using the / button, and press the OK ( ) button. Then the subtitle will be displayed in the selected language at the bottom of the screen. Select OFF from the subtitle language list if you do not wish to display subtitles in the screen. Note : You can select a default subtitle language by selecting Setup Digital Channel - Preferences - Local Setting - Subtitle Language menu. 2. 3 Changing an Audio Language If the current programme is available in multiple audio languages, you can select the language that you wish to listen in. 1. Select your desired audio language using the / and OK ( ) button to change the audio soundtrack. Basic Operation 2. Basic Operation Note: _ you can select your desired default audio language by selecting Setup Digital Channel - Preferences - Local Setting - Audio Language menu. _ If the programme is broadcast in Dolby Digital one, you cannot set the audio preference such as left, right, and stereo. _ If you select Dolby Digital by selecting Setup Digital Channel - Preferences - Local Setting-Audio Priority menu, Dolby Digital soundtrack is automatically used in preference to the default audio language. 2. 4 Program Information-Information Banner (I-plate) Programme information is always displayed for a specific period of time whenever you switch channels. You can view the programme information by pressing the INFO ( ) button while watching a programme. Select Delete in the right using the button, and press the OK ( ) button. 33. Lock/Unlock Channels You can lock or unlock one or more channels. 1. Select Lock in the right using the button, and press the OK ( ) button. 4. Select/Unselect All Channels You can select/unselect all channels at a time. 1. Select Unselect All in the right and press the OK ( all the selected channels. DTV - Channel List 3. 3 Editing Favourite Channels You can edit Favourite channel or Favourite channel list. 1. Select Edit Favourite Channels using the / button, and press the OK ( ) or button. 4. In this way, you can Note : _ Press the DTV CH ( ) or RADIO CH ( ) button to move to TV or RADIO channel list directly. _ Press the BACK ( ) or button to save the changes and return to the previous menu. DTV-Channel List 4. DTV - Programme Guide The Programme Guide displays programme information about each channel, based on the date and time. You can also schedule your recording using the information given. Note : Press the GUIDE ( ) button to exit the Guide screen. 4. 1 Viewing Programme Guide Information You can view programme information for all channels. 1. [. . . ] Remote Control does not operate + To control the equipment with the remote control, the remote control's top end should be pointed directly towards the receiving part of LCD-TV's remote sensor. Trouble Shooting Trouble Shooting Error Message Error message No or bad signal Possible causes + The aerial is not installed correctly. If you cannot resolve the problem you may need to have your aerial and installation tested by a professional. The channel is scrambled or not available. + The channel has a signal but no audio or video. + The channel is for data broadcasting. + Confirm if the channel is currently on air. [. . . ]