User manual HUMAX NA-3712

[. . . ] Digital Set-Top Box with Nagravision Embedded Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB2 ~ GB5 Support & Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB6 Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 ~ GB8 STB Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Subtitle Language Select the Default Language for Subtitle when changing services. Language provided: Danish, English, Finnish, French, German, Greek, Hungarian, Italian, Norwegian, Portuguese, Spanish, Swedish and more. GB23 Main Menu Guide Time Setting You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup Time mode and Sleep Time (standby mode) can be set. When a VCR is connected, recording can be automatically done according to Wakeup/Sleep Time Setting. Current Time To set the Current Time, enter the Offset value using the standardized information of current service area. The time setting will be used as the standardized time for the I-Plate, TV Guide, Wakeup and Sleep timer. Time Offset Current time is based on TDT (Time and Data Table) at the stream of the current service. Use the Number buttons(0~9) on the remote control unit to enter your Wakeup Time. Use the buttons to set the service number provided for the set Wakeup Time. Use the TV/Radio( )button on the remote control unit to toggle TV/Radio service. Service Name The Service Name that has been determined by the Wakeup Service No. Sleep Time Depending on Time Setting, select the time when STB is turned off. GB24 A/V Output Setting Audio Output Set the Audio mode which is output from RCA/Cinch Jack. (STEREO/MONO) Screen Mode Select the aspect ratio of TV which is connected to STB(4:3 or 16:9). Display Format Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-box or Center mode as selected. When your TV set is 16:9 and video source is 4:3, STB will display in the Pillar-box or Full mode as selected. NTSC Mode Adjust this value between 3. 58 and 4. 43 if your TV displays the video only in black and white color. Normally NTSC 3. 58 mode is used worldwide, but some TV sets can support only NTSC 4. 43 mode. VHF Tuning When you watch TV after connecting a cable between the RF OUT jack on STB and the Input jack (RF Input) on TV. If you select Channel 3 or Channel 4 and then set VHF Tuning to Channel 3 or Channel 4, all services from STB will be viewed through TV Channel 3 or Channel 4. GB25 Main Menu Guide Other Setting Select the OSD transparency and Information Box Display Time. It affects Information Box, Service List, Time and Quick mode of TV Guide. Box Display Time Set the display duration of Information Box displayed on the screen after changing services. [. . . ] Repeat the process for all the transponders you want from this satellite. GB40 8. Automatic Search It is possible to use automatic search using the DiSEqC 1. 2 motorised system. Ensure that the positions for the satellite you want to search is correct. (see Section 3 and 5 above) 2. In the Main Menu, select the option channel searching and press the OK button. [. . . ]