User manual HUMAX PDR-9750

[. . . ] Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without notice. Copyright (Copyright © 2007 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. Warranty The warranty does not cover parts which may become defective due to misuse of the information contained in this manual. Trademarks · · · · · · Viaccess is a trademark of France Telecom. `Dolby and the double-D symbol are trademarks of Dolby Laboratories. This product incorporates copyright protection technology that is protected by U. S. [. . . ] Select Start Search of All Program Providers and press the OK button and enter the values for Satellite, Search Type and Channel Type. Select Search and press the OK button to activate search. GB49 User's Manual 8. Picure Format Select Picture Format using the / button and select from 4:3 and 16:9 using the OK or button. 2. Display Format You can set the display format according to the picture format of your TV. When choosing 4:3 as picture format, select an option among Auto, Letter Box and Center Mode using the / button and press the OK or button. When choosing 16:9 as picture format, select an option among Auto, Pillar Box and Full Mode using the / button and press the OK or button. 3. Select an option among CVBS, RGB and S-Video using the / button and press the OK or button. 4. Select AV Control using the / button and select On/Off using the OK or 2. If you select On, the integrated Dolby DigitalTM decoder is enable automatically when a Dolby DigitalTM programme is received. 8. 9 Channel List 1. Select Reset Channel List using the / button and press the OK button to change the pre-programmed channel list. GB51 User's Manual 9. Record Note: · Press the EXIT or button to save the changes and return to the previous menu. · Press the MENU button to exit the menu screen. 9. 1 Recorded Programme 1. Select Recorded Programme using the / button and press the OK or button. The recorded programme will start to play in the video preview window. Press the PRO button to delete all recorded programmes from the recorded programme list. Note: · You can also easily view the recorded programme list by pressing the ARCHIV button while you are watching a programme. · Press the i button to view the detailed information of the recorded programme. · You can perform Time Shifted Recording (TSR) and other VCR functions within TSR using the playback control buttons while playing a programme. Select Play using the / button and press the OK button to play back the recorded programmes starting at the point it was stopped. Select Replay using the / button and press the OK button to play back the recorded programme from the beginning. Select Delete using the / button and press the OK button to delete the recorded programme. GB52 User's Manual 9. Select Programme using the / button and press the OK button to display a keyboard on the screen. [. . . ] A LNB converts signals received from satellite to a lower frequency and sends them to a satellite receiver via coaxial cable. NVOD (Near Video On Demand) A technology that allows customers to view the start of popular programmes or films within a short period from the time they make their selection. This is possible as the broadcaster sends multiple copies with staggered start times. OSD (On Screen Display) OSD displays the basic information necessary for the users to configure monitor or TV settings. [. . . ]