User manual HUMAX VACI-5300PLUS

[. . . ] Notice Copyright (Copyright 2001 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** Warranty The information in this document is subject to change without notice. HUMAX does not have any responsibility for direct, indirect, accidental, necessary and other damage due to your offer or use of the information contained in this manual. ** Trademarks VIACCESSTM is a trademark of France Telecom. 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. ** Thank you for purchasing a HUMAX set top box. [. . . ] Guide of Main Menu NTSC Mode Adjust this value between 3. 58 and 4. 43 if your TV displays the video only in black and white color. Normally NTSC 3. 58 mode is used worldwide, but some TV sets can support only NTSC 4. 43 mode. UHF Tuning You select the STB output by using the UHF channel. Channel Select an UHF channel. The range of channels and frequency value are different for each PAL Standard: PAL I/G for Europe PAL B for Europe/Australia PAL D for China PAL K for Russia : CH21 ~ CH69 : CH28 ~ CH69 : CH13 ~ CH62 : CH21 ~ CH69 PAL Standard Select a PAL Standard according to the above range of channels. Offset Adjust the fine tuning value. The Offset ranges from -4 to +4 and each Offset represents 1MHz. ** Other Setting Select the OSD Transparency, Information Box Display Time and so on. OSD Transparency Select the OSD Transparent type. It affects Information box, Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Use the buttons to toggle transparent, opaque, 25%, 50%, and 75%. Info. Box Display Time Set the display duration of Information box displayed on the screen after changing services. The time ranges from 0 to 20 seconds. Changing to Reserved Service When the reserved time has come during the view of services: ** · Manual Mode This mode shows the message "A reserved event has started on another service. (will automatically change after 10 seconds. )" And ask the presence of change and then makes a change. ** · Auto Mode The current service will be automatically changed to the time-reserved service. GB 28 4. Service Organising This menu gives users access to options that allow them to organise their TV Services, Radio Services and Networks. ** The default PIN code is 0000. Organise TV Services Organise All Services This mode allows users to Delete, Move, Lock, Skip and Rename TV Services. ** ** · Delete ** 1. Press the GREEN button to move the service to where you want to locate. Then, the symbol " " will be displayed at the right side of the service name. Enter the PIN code to view the locked services. ** · Skip ** 1. Then, the symbol " " will be displayed at the right side of the service name. Use the NUMERICAL (0~9) buttons, service list or the GUIDE when selecting channels. Note: You can't view the skipped services by using the CH-/CH+ buttons. ** · Rename ** 1. Guide of Main Menu You can use the four direction keys to move or select the services. ** : to move the previous service : to move the next service : to move back by services : to move forwards by services ** Note: The box between service list and the description of the colour buttons offers the brief information of a service where the cursor is located. ** Organise Favourite A~D Each of TV and Radio has four Favourite groups. Delete, Move, Lock, Skip or Rename each TV service in a Favourite TV group and re-group them into your Favourite TV group. This mode has the same operating methods as "organise all services". ** · When you delete a service in the Favourite group, it will be available again on the All TV service list. Coloured keys are available when the cursor is located in the middle window. (Except when the middle window is disabled(grey). ) · · ** To select the Favourite group; 1. [. . . ] If you are using a DiSEqC 1. 0 switch, check that you have connected the LNBs to the correct connections on the switch. Check the "Signal Level" and the "Signal Quality" in the Signal Status menu. Check whether the common Interface module and Smart card are correctly inserted. Check whether the common Interface module and Smart card is appropriate for the selected service. Service is not running or scrambled / No access to the service slot. GB 48 6. [. . . ]