User manual HUSQVARNA 353 EPA III

[. . . ] Operator’s manual 346XP EPA I 353 EPA III Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. English KEY TO SYMBOLS Symbols on the machine: WARNING!Careless or improper use can result in serious or fatal injury to the operator or others. Symbols in the operator’s manual: Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear approved protective gloves. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor Regular cleaning is required. Both of the operator′s hands must be used to operate the chain saw. Visual check. Never operate a chain saw holding it with one hand only. Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. If your machine bears this symbol it is equipped with a catalytic converter. [. . . ] Check that all parts of the chain saw are tightened correctly and that they are not damaged or missing. Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident. 2 Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc. Take great care when removing small branches and avoid cutting bushes (i. e. Small branches can be grabbed by the chain and thrown back at you, causing serious injury. 10 Check the chain tension. General working instructions IMPORTANT!This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Before using a chain saw you must understand the effects of kickback and how to avoid them. Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine’s safety equipment. See instructions under the heading Personal protective equipment. 4 Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc. ) in case you have to move suddenly. Take great care when working on sloping ground. 22 – English WORKING TECHNIQUES 5 Take great care when cutting a tree that is under tension. A tree that is under tension may spring back to its normal position before or after being cut. If you position yourself incorrectly or make the cut in the wrong place the tree may hit you or the machine and cause you to lose control. Both situations can cause serious personal injury. 6 Before moving your chain saw switch off the engine and lock the chain using the chain brake. Fit a guard to the bar before transporting the chain saw or carrying it for any distance. Have control over the workpiece. If the pieces you intend to cut are small and light, they can jam in the saw chain and be thrown towards you. Even if this does not need to be a danger, you may be surprised and lose control of the saw. Remove the cut pieces to keep your working area safe. 7 When you put the chain saw on the ground, lock the saw chain using the chain brake and ensure you have a constant view of the machine. [. . . ] A chain saw is intended for two-handed use. With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. [. . . ]