User manual HUSQVARNA 55 RANCHER

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA 55 RANCHER. We hope that this HUSQVARNA 55 RANCHER user guide will be useful to you.


HUSQVARNA 55 RANCHER : Download the complete user guide (2149 Ko)

You may also download the following manuals related to this product:

   HUSQVARNA 55 RANCHER (7060 ko)
   HUSQVARNA 55 RANCHER (7060 ko)
   HUSQVARNA 55 RANCHER (7060 ko)

Manual abstract: user guide HUSQVARNA 55 RANCHER

Detailed instructions for use are in the User's Guide.

[. . . ] Operator’s manual (EPA I) 55 Rancher Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. English KEY TO SYMBOLS Key to symbols WARNING!Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: • • • Approved protective helmet Approved hearing protection Protective goggles or a visor Refuelling. Filling with oil and adjusting oil flow. Other symbols/decals on the machine refer to special certification requirements for certain markets. Both of the operator′s hands must be used to operate the chain saw. [. . . ] Never wrap the starter cord around your hand • General working instructions ! Fuel safety WARNING!This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Do not attempt any task that you feel unsure of! Before using a chain saw you must understand the effects of kickback and how to avoid them. Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the heading How to avoid kickback. ! • • • WARNING!Be aware of the risks of fire, explosion and those associated with inhalation. Basic safety rules • Look around you: To ensure that people, animals or other things cannot affect your control of the machine. To make sure that none of the above might come within reach of your saw or be injured by falling trees. Never refuel the machine while the engine is running. Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil). Move the machine at least 3 m from the refuelling point before starting it. Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident. • Never start the machine: 1 2 If you have spilt fuel or chain oil on the machine. If you have spilt fuel on yourself or your clothes, change your clothes. Check regularly for leaks from the fuel cap and fuel lines. English • Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc. 3 – 17 SAFETY INSTRUCTIONS • Take great care when removing small branches and avoid cutting bushes (i. e. Small branches can be grabbed by the chain and thrown back at you, causing serious injury. Basic cutting technique General • • Always use full throttle when cutting!Reduce the speed to idle after every cut (running the engine for too long at full throttle without any load, i. e. without any resistance from the chain during cutting, can lead to serious engine damage). Cutting from below = Cutting on the push stroke. • Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc. ) in case you have to move suddenly. Take great care when working on sloping ground. • • Cutting on the push stroke increases the risk of kickback. See instructions under the heading How to avoid kickback. Terms Cutting = General term for cutting through wood. [. . . ] For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar. Low kickback saw chain is a chain which has only met the kickback performance requirements of ANSI B 175. 1 safety requirements for gasoline powered chain saws when tested on the representative sample of chain saws below 3. 8 cu. We recommend that you as a replacement use the listed chains or "Low kickback saw chains" which are available at your dealer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA 55 RANCHER




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA 55 RANCHER will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.